Ianhill
1 MW
- Joined
- Sep 25, 2015
- Messages
- 2,871
There's one issue thats going to cause problems with this ride and you have done well its not a problem you have made as such but more of a packaging constraint.
With the battery weight on the outer edges of the ride its turn in ability will be hampered as a results it becomes twitchy easy to pull wide just harder to place consistently on track lines.
Somehow that battery weight needs to be centred but the human stay just as low to the ground as possible, but even if you make a frame with a centre tunnel of some sort it will still make it very difficult package to design and fit the power you need in but that would allow you finer control and bring the laptime down make the kart easier to drive but that design would mean you have cracked it and would have the most advanced driving electric gokart design there ever has been to date.
With the battery weight on the outer edges of the ride its turn in ability will be hampered as a results it becomes twitchy easy to pull wide just harder to place consistently on track lines.
Somehow that battery weight needs to be centred but the human stay just as low to the ground as possible, but even if you make a frame with a centre tunnel of some sort it will still make it very difficult package to design and fit the power you need in but that would allow you finer control and bring the laptime down make the kart easier to drive but that design would mean you have cracked it and would have the most advanced driving electric gokart design there ever has been to date.