npcspellen
100 µW
- Joined
- Sep 16, 2021
- Messages
- 8
CiDi said:To configure the Bafang M500 / M600 motor without using the BESST programmer, you can use this interface.
Link interface USB to CAN on Amazon:
https://www.amazon.co.uk/USB-Converter-Module-Raspberry-Zero/dp/B07Q812QK8/ref=sr_1_2?dchild=1&keywords=usb+to+can+innomaker&qid=1604409709&sr=8-2
Link cables Bafang HMI M500/M600 on e-bike-technologies:
https://www.e-bike-technologies.de/index.php/en/connectors/connectors-signal/connectors-higo-mini-f-series/higo-b5-f-detail
https://www.e-bike-technologies.de/index.php/en/connectors/connectors-signal/connectors-higo-mini-f-series/higo-s5-f-detail
Below are the software and the instructions for configuration and use.
I have bought the set! I am going to try to change the speed limit on my bafang m420 with dpc18 now. But 1 question. I only want to increase max speed. So i would only have to change the hex for the speed. Or do i also need to change the other 2? Why would i need to change the other 2?