Stevebequik
100 mW
- Joined
- Mar 18, 2019
- Messages
- 36
We have about 3 hours on the 530 and so far everything is going really well.
Saying that, it’s only operating at a bit over half capacity, so I would hope there are no problems.
It’s set to 160/300a from its max of 330/530A.
Heat sink with my crude measurement technique only got 5 -10 degrees C above ambient.
Still don’t know what I’m going to do with the bricked 360.
The App does have a ‘FLASH’ function. But I am unable to get the Filmware out of far-driver.
I may pay the $100usd they offered for a replacement and then tear it open to have a look at the internals.
Saying that, it’s only operating at a bit over half capacity, so I would hope there are no problems.
It’s set to 160/300a from its max of 330/530A.
Heat sink with my crude measurement technique only got 5 -10 degrees C above ambient.
Still don’t know what I’m going to do with the bricked 360.
The App does have a ‘FLASH’ function. But I am unable to get the Filmware out of far-driver.
I may pay the $100usd they offered for a replacement and then tear it open to have a look at the internals.