andrea_104kg
1 kW
- Joined
- Mar 5, 2018
- Messages
- 344
Ok, for those who want to try it here is the master branch with the porting of all the modifications of the torque x4 (except the operation on x4 which I have eliminated since it does not work on my control unit).
I could not do extensive tests butbut I have seen that the speedometer, the bars, the wattmeter are working.
I simply noticed that on github you can make the comparison between one version and another and then with a little patience and a little logic I ported all the pachs made by Stancecoke into x4 torque (editing with notepad ++ and simply try with Start compile.bat):
Throttle override, bug that causes the engine to shut down, changed to integer arithmetic and shift to the right, Bugfix in the calculation of the current target. I did not touch the walk assist because it seemed to me it was already in the master. I could not try the bike on the road, unfortunately bad luck sees us well, as soon as I got on the bike (mtb) the old rear shock absorber burst and I found myself with the wheel touching the frame :-(
So give it a try, unfortunately I won't be able to do it for the next 3-4 days :-(
But at least on the stand everything works.
If it works maybe someone who knows how to put it on github, don't ask me, I can't do it :-(
View attachment BMSBattery_S_controllers_firmware-Master_all_bug_fix_as_x4troque.zip
I could not do extensive tests butbut I have seen that the speedometer, the bars, the wattmeter are working.
I simply noticed that on github you can make the comparison between one version and another and then with a little patience and a little logic I ported all the pachs made by Stancecoke into x4 torque (editing with notepad ++ and simply try with Start compile.bat):
Throttle override, bug that causes the engine to shut down, changed to integer arithmetic and shift to the right, Bugfix in the calculation of the current target. I did not touch the walk assist because it seemed to me it was already in the master. I could not try the bike on the road, unfortunately bad luck sees us well, as soon as I got on the bike (mtb) the old rear shock absorber burst and I found myself with the wheel touching the frame :-(
So give it a try, unfortunately I won't be able to do it for the next 3-4 days :-(
But at least on the stand everything works.
If it works maybe someone who knows how to put it on github, don't ask me, I can't do it :-(
View attachment BMSBattery_S_controllers_firmware-Master_all_bug_fix_as_x4troque.zip