Speedict Ebike - Anybody seen/tried this?

yes, we are stepped into speed controller now, dynamic regenerative mean you can change the regenerative level in the air via android device, choice the right regen level as you want ...
initially not big, just 6 x 4110, but will extend to 12 x 4110, just need to change the mosfet and case you know ... the input voltage range will be like eBike from 12v - 100v

any comments and advises are welcome !
 
yes we have Android client 2.0 and firmware for it, Android client 2.0 allow offline data view, you can download data from ebike right to your android without download to pc, with all trip records in hand you can do some trip and battery analysis ... i am in china now can not access 4shared.com to upload the pdf, so when i back to hong kong this weekend i will do it, if you interested now, please pm me your email address, i will send you the pdf !
 
Hey Danny,


So how many amps will this new controller be capable of? Can we run 100amps through it at 48 volts for example? Lots of us are interested in running lots of amps.

Will it be for motor with or without hall sensors or both? Can we run RC motor on it or just hub motors?

Will it have low voltage cut off or other protections for those of us that run lipos with no bms?
 
hey green machine,

the power just depend on number of mosfet and power of mosfet, if market need, we just need to change layout and case size, our design handle power input from 12V to 100V without need to change any resistor, and the voltage cutoff is done by android or pc, don't need to change resistor either !

support both hall and no hall, good idea to run on rc motor ! we did rc speed controller before http://www.raczing.com, theoretical yes we can support rc motor

keep discuss here
 
this looks pretty cool.... is there an iphone app in the pipeline?.... :wink:
 
currently we focus on android only, we love to support iphone but apple block its bluetooth from transfer data because they want to control developer to use their connector and request profile sharing :(

we did on iphone by written app directly control the bluetooth chip, but now iphone changed the bluetooth chip to broadcom ... we didn't follow ...
 
dang! I do love my iphone but don't love the way they lock their products down... thanks anyway!
 
andynogo said:
dang! I do love my iphone but don't love the way they lock their products down... thanks anyway!

I've had mine for a while ready to deploy when all my parts finally arrive. I'm going to use this as a dedicated display, no sim card required

http://www.samsung.com/galaxyplayer50/
 
remf said:
andynogo said:
dang! I do love my iphone but don't love the way they lock their products down... thanks anyway!

I've had mine for a while ready to deploy when all my parts finally arrive. I'm going to use this as a dedicated display, no sim card required

http://www.samsung.com/galaxyplayer50/


we have sourced one dirt cheap china pmp however it is too big - 4.2" but cost is attractive ~ 25 Eur, we are working on its ROM to make it bluetooth support, but it has no gps supported :(
 
speedict said:
guys google this model :

WINDOW N3, this is cheap china android PMP, resistive touch screen, no GPS, no Bluetooth, it is 4.3 screen (may be too big ?)
we are working on its ROM to enable the bluetooth stack ... or use OTG to wire communicate with our product in the future !

Yeah I think 4.3 is too big, 2.8 or 3.2 would be much better.

OMG Greenman I actually agree with you on something :lol: Yes the Archos 32 is probably a better choice, it runs Froyo 2.2 while the Samsung runs Eclair 2.1 and is more expensive. I may try it on my phone but it runs Gingerbread 2.3 so not sure if it's compatible since Speedict is not available in Android Market on 2.3.
 
remf said:
speedict said:
guys google this model :

WINDOW N3, this is cheap china android PMP, resistive touch screen, no GPS, no Bluetooth, it is 4.3 screen (may be too big ?)
we are working on its ROM to enable the bluetooth stack ... or use OTG to wire communicate with our product in the future !

Yeah I think 4.3 is too big, 2.8 or 3.2 would be much better.

OMG Greenman I actually agree with you on something :lol: Yes the Archos 32 is probably a better choice, it runs Froyo 2.2 while the Samsung runs Eclair 2.1 and is more expensive. I may try it on my phone but it runs Gingerbread 2.3 so not sure if it's compatible since Speedict is not available in Android Market on 2.3.


hi remf,

OMG too, just realized we didn't upload our 2.3 compatible to Android Market, last week we sent 2.3 to our user who bought HTC, because it is not official therefore we sent apk instead, and it worked but we forgot to upload to market until today ... please wait for a moment, i do it TODAY ...
 
Got any pictures I can put on my ebike computer page? All your pics on your site are blocked from downloading...

I love where you're going with this project. I can't wait until you have a weather proof android device with built in GPS I can run full time as a dashboard.
 
speedict said:
hey guy,

we just uploaded Android client 1.0.4 for Android Gingerbread 2.3 on Android Market, should you need it please do upgrade :)

I found the Speedict update on market.android.com though it says it's incompatible with my phone, an HTC Desire. I remember that it worked on Froyo on this device so it seems to be a Gingerbread compatibility issue. Do you have an .apk file I can try?
 
auraslip said:
Got any pictures I can put on my ebike computer page? All your pics on your site are blocked from downloading...

I love where you're going with this project. I can't wait until you have a weather proof android device with built in GPS I can run full time as a dashboard.


you can download it from flickr

http://www.flickr.com/photos/speedict/

let me know if you still can not download ...
 
remf said:
speedict said:
hey guy,

we just uploaded Android client 1.0.4 for Android Gingerbread 2.3 on Android Market, should you need it please do upgrade :)

I found the Speedict update on market.android.com though it says it's incompatible with my phone, an HTC Desire. I remember that it worked on Froyo on this device so it seems to be a Gingerbread compatibility issue. Do you have an .apk file I can try?

hi remf,

please try this apk first, we made this yesterday ...
http://www.4shared.com/file/wenaeNIN/Speedict-eBike-104-20110617.html

or this, we sent this to our user for his HTC 2.3 last month, according to his info, it is ok !
http://www.4shared.com/file/Z4hNAxJT/speedict-ebike-v2-2011-05-27.html
 
speedict said:
remf said:
speedict said:
hey guy,

we just uploaded Android client 1.0.4 for Android Gingerbread 2.3 on Android Market, should you need it please do upgrade :)

I found the Speedict update on market.android.com though it says it's incompatible with my phone, an HTC Desire. I remember that it worked on Froyo on this device so it seems to be a Gingerbread compatibility issue. Do you have an .apk file I can try?

hi remf,

please try this apk first, we made this yesterday ...
http://www.4shared.com/file/wenaeNIN/Speedict-eBike-104-20110617.html

or this, we sent this to our user for his HTC 2.3 last month, according to his info, it is ok !
http://www.4shared.com/file/Z4hNAxJT/speedict-ebike-v2-2011-05-27.html

The first one works. Fine service, Mr Speedict. Thanks!
 
remf said:
speedict said:
remf said:
I found the Speedict update on market.android.com though it says it's incompatible with my phone, an HTC Desire. I remember that it worked on Froyo on this device so it seems to be a Gingerbread compatibility issue. Do you have an .apk file I can try?

hi remf,

please try this apk first, we made this yesterday ...
http://www.4shared.com/file/wenaeNIN/Speedict-eBike-104-20110617.html

or this, we sent this to our user for his HTC 2.3 last month, according to his info, it is ok !
http://www.4shared.com/file/Z4hNAxJT/speedict-ebike-v2-2011-05-27.html

The first one works. Fine service, Mr Speedict. Thanks!


the first one is the market version, we uploaded yesterday, as per your information, it work on apk but not market download, wow will take a look next monday.

you guys can call me Danny :)
 
Just a suggestion......

I downloaded the speedict software to see if it ran on my phone, and also to see what it looked and felt like.

Becasue I don't ave the hardware, I cannot do anything with it.

If you made it so I could play with it and see how it looked, it might be a good incentive to buy for people and also help you to spot issues with specific phones BEFORE those people buy the speedict and it doesnt work right......
 
jonathanm said:
Just a suggestion......

I downloaded the speedict software to see if it ran on my phone, and also to see what it looked and felt like.

Becasue I don't ave the hardware, I cannot do anything with it.

If you made it so I could play with it and see how it looked, it might be a good incentive to buy for people and also help you to spot issues with specific phones BEFORE those people buy the speedict and it doesnt work right......

I always suggest this, as android work with device brands differently, I have some tips based on my experiences such as go to market download our app run it and see if it will crash, get other Bluetooth phone and try do file transfer to see if your phone's bluetooth works, I was told by user his htc has Bluetooth file transfer problem and waiting for bug fix.
and you can also download our user manual, see I posted version 2.0 user guide in this forum ...
 
Hi Speedict.....what I am saying is that I *did* download the software, and it starts up, but I cannot do anything with it, because it gets stuck on "searching device" ....if I select another bluetooth device it says : "connecting device" then as it fails to connect it goes back to "searching device".

Obviously this is because I do not have the hardware...

What I am asking is that you make the software so that I can run it, look through the screens, options, settings etc....even though I do not have the hardware to actually run it properly.

This would allow me to make a better appraisal and make a more informed purchase.

Thanks :)

J
 
jonathanm said:
Hi Speedict.....what I am saying is that I *did* download the software, and it starts up, but I cannot do anything with it, because it gets stuck on "searching device" ....if I select another bluetooth device it says : "connecting device" then as it fails to connect it goes back to "searching device".

Obviously this is because I do not have the hardware...

What I am asking is that you make the software so that I can run it, look through the screens, options, settings etc....even though I do not have the hardware to actually run it properly.

This would allow me to make a better appraisal and make a more informed purchase.

Thanks :)

J


hi jonathanm,

i see, we are going to launch the android ebike client 2.0, provides offline data access and battery analytic features etc., please find below link to download the .apk and its documents, you should have an idea what would be look like !

.apk (just install the .apk, don't need the .bin as it is firmware upgrade file for ebike device)
http://www.4shared.com/file/Z4hNAxJT/speedict-ebike-v2-2011-05-27.html

the document
http://www.4shared.com/document/3hf3QFEX/_20110611__android_client_20.html

should you have any queries, please let me know.

cheers,

danny
 
Back
Top