Recent content by 6moe66

Any cells left? Please PM me thanks. UK based

Ah ok, any thoughts on how to make this smoother (I have No CA) I do have a 750C which i use for the Kelly but dont know if i can interface this to the cheap controller? An in-line resistor on the throttle perhaps to help? The controller does have a 3 speed switch option and i use that with the...

Thanks, I run a Kelly KLS72120s with this set up no problems and without pushing settings on the Kelly, i will see bursts of >6000W so i find it hard to believe that my pack is undersized for a 1500-2000W cheap controller? My workings are as follows- 72v 21Ah 20s6p -18650 35E cells x120...

I've a spare cheap Chinese controller and decided to try it out on my mxus 3KT hub motor but it keeps tripping my BMS due to Low voltage. My battery is a custom 20S6P 72v with 35E cells and 60A BMS. The motor runs fine off load and very little voltage drop but as soon as I'm on it, it cuts...

Thanks, There are no LED lights on the controller. They do not flash up anymore. With only the controller power connected (Pin 7) - 82V seen at Pin7 0V @ Pins 4/5/11 Also between red and black on the Comms connector shows 0V Any ideas?

Any Kelly guru's out there? I engaged anti skid (KLS-7212S) and seems like my controller inst switching on now (no Led's or dive to motor). I did around 10 miles and it was fine and seemed to assist breaking after a period with no throttle input. TFT 750C display is working but showing error...

Just about to put this all together and looking for any tips or pointers with my proposed wiring, connectors and fuse/breakers (see picture). Not my first build but first build with the KELLY controller 🚴🏼 https://imgur.com/a/SanWNNm

What Wattage does the LCD state it is putting out? My SW900 only seems to go to 20A Maybe an older one?

Sounds great! Did you originally have the Hub with internal controller? Im currently running 1500W rear hub with internal controller, 52V 20Ah 40A BMS battery and SW900 LCD that came with it. Very happy with the performance but would be good to know that an external controller could be...

Did you find out any more info regarding the motor/controller and the ability to upgrade?