Recent content by 7lucky7

Essentially this max torque takeoff in your highest gear is a bad idea. If you start in your highest gear you are putting maximum torque through the motor to get going. And the resistance to turning is high. You'll basically shred your blue gear if that isn't the noise you're already hearing...

Running this https://github.com/emmebrusa/TSDZ2-Smart-EBike-1/releases/tag/v20.1C.2 Feel the vlcd5 did sightly limit by ability to see what read going on but it's what I've got so 🤷. Was so happy with it I hadn't changed anything in literally over a year. Had to dig out my ST Link and...

FIXED so I've had everything apart today to try and dry it which didn't seem to fix the problem. I also posted on the pedelec forum. ( https://www.pedelecs.co.uk/forum/threads/tsdz2-motor-failure-after-washing.43740/ ) Where someone kindly suggested that they had a similar problem and...

Hi thanks for your reply. This was my first thought, but I've opened the casing, no sign of water, looked at all wiring connections, plus other functions work like the lights and startup doesn't show any problem. I tried turning the walk assist mode on and that won't work either. I'm waiting...

So I think it must be the motor (though I can't see anything wrong with it when I opened the housing) because it won't even start up in walk mode. Having intermittent issues still with my speed sensor. Not sure what else to do really except order a replacement motor.

Hi all. Happy tsdz2 user for 2 years with about 2k miles on the bike using the osf with great results. I washed my bike down at the weekend and since have been getting all sorts of issues My speed sensor is very intermittent. I had a second one and so changed it but with the same result...

I find it somewhat hard to believe that a single impact did that to your gear but certainly looks like it needs replacing!!!

Thanks!!! Sounds exactly what I did. Basically grease everywhere but the seals definitely helped quite a bit. Next time I go inside I'll see if I can figure anything else to improve. Segway but yes it seems incredible durable. I've pulled a trailer of 40kg with me 85kg also on the bike and...

For people that have done internal maintainance. What kind of lubrication do people use and has anyone found a way to reduce the drag caused by the rubber sealant rings on the chainring side?? (It's significantly less without these and the cranks full with gravity, but with them in place much...

I'd say it runs a million miles better and feels much more natural. Because I'm using power assist not torque assist it doesn't give as big jolts of power like you do on the original factory firmware and sport or turbo settings when you stood on the pedals. I didn't particularly like that...

Hi everyone. After doing another 100miles on my new settings i thought i'd share just in case people were interested in riding the way i do as I think a lot of people just seem to want huge amounts of power and assist whereas i see just a little boost to my natural riding speed as the goal for...

Thanks I'll probably go with 15A 450w for my next flash and just see how it rides for 50 miles or so

Thanks so much for the detailed reply. Regarding point 1 what would be your recommended settings. Keeping 16a and upping max power to 480w??? (I did notice the peak power was less than factory setting with the 250w setting cycling this morning, though I usually ride on eco so only noticed with...

Hi this is my first time flashing with this firmware. Firstly thanks to everyone for all the great work. I was mainly after the higher cadence assistance but look forward to a bit of tinkering I've got the 250w 36v motor version but have a few little questions. i've attached a screenshot of...

Isn't this the casaihno code that requires a new display though!?