Recent content by A29Adriver@gmail.com

Here is a website that sells lithium batteries, it appears to me that they try to put the least amount of manpower hours into selling the batteries. They don't take the packs apart and give as much information about each individual battery that are in the packs and give info about how the final...

I ordered 2 batteries on June 25th and received them in the mail today. One checked out at 48+ volts and the other at 53+ volts. The charging plug and load plug are different than plugs I am familiar with, but could easily be changed to xt's or other plugs that are used on ebikes. The plugs...

I have been playing with the Sturmey-archer wheels. One of the two wheels I received looks like it had been in an accident in its previous life and the fulcrum level is broken, I have orderd a replacement ($9.95). The other wheel is in fine shape and I looked at the brake shoes on both wheels...

Now that I have received my order, I am wondering if anybody has started playing with these motors? I think you could probably carefully cut off the 9-pin connector and keep track of the wires by using the pin-out in an early post. However, I am going to order one 9-pin Higo adapter cable to...

I got my order this week and only received the two Bafang front wheels instead of the 4 wheels that I originally ordered, I sent Guy an email and hope to get the other two wheels. I ordered the 4 wheel deals to get the Marathon tires which alone are almost worth the cost of the entire deal...

I received this email this morning. Anybody who ordered probably got an email also, but I thought I would go ahead and post it here so that everyone could see it. Hello, These wheels have had a pretty cool adventure along the way, but they are all shipping now. All the orders that were for...

Hello Ebike 11, Rick from Quincy here. See Justin's video "all about hub motors": https://www.youtube.com/watch?v=c96n0Ma2rLY Thermal cooling about one hour into the video and holes about 1 hour and 25 minutes. Well worth watching and the size of the holes are impressive.

O.K. Amberwolf you get a gold star. I thought I had tried every thing, but I must not have changed the Forward and Reverse settings. I just changed it and it seems to work. Its raining now, but it works on the bike stand, so I will take it for a ride as soon as its dry. Thank you.

Sorry other screen shots,

I have a problem with my CycleAnalyst and PAS mode. When I purchased the CA (second hand) it had version 1 firmware and at one time about 2 months ago the PAS worked. As I learn about CA I reset it to the default parameters. When I did this the PAS mode stopped working. I have gone thru the...

I need help trying to find a good combination controller and display that work together. I am putting them on a Xtreme Folding Bike XB310Li. This bike is a mediocre bike, but I like it and would like a good controller/display. The bike is rated at 24 volts, but I have run it at 36 volts and...

Mark5; Thank you for the YouTube link I will watch all the videos to glean as much information as I can.

Amberwolf; Thanks for the information about the racks. It makes sense, because you can hear all the racket from the back when riding on rough roads, but I had not thought about the forces that could cause the racks to fail under such conditions. I will move the batteries to different areas, 4...

Thanks for your quick reply. No my question is just to run the 24 volt ebikes on 24 volts. Before I run any of the ebikes on a higher voltage, I would change the controller and do some testing to see how hot the motors get on test rides. I was just wondering if others have used similar setups...

I have a few old electric bicycles: 2 E-ZIP (about 10 years old), EVGLOBAL, and an Extreme Folding XB-310, all of them 24 Volt ebikes. I have been going thru the bicycle components: new Slime Tubes, Slime Tube protectors; truing the wheels; greasing the headtubes, axle bearings; etc. and having...