Recent content by adh247

My problem is as you can see in the pictures, the switching box and/or battery selector that's in the frame is filled.witb epoxy, but my worry is this.. Last time I worked on the bike I had noticed that some the +/- wiring seemed to be a bit corroded, so I tried to brush off corrosion in order...

I finally got around to fixing the problem of throttle run away, as well as the problem that caused my bike to lurch forward after turning the bike off. It was the throttle after all. I got a new throttle that looks just like the original except it has no SOC or led indicators. First pic is...

@amberwolf that is some very helpful advice. it makes sense that it might be a ground. So there's no way take it apart and clean it etc? I really like this throttle so I'm gonna have to look around for someone that might have one. Do you think it might be causing this problem as well? I'm...

Thank you for the very detailed answer! I have the factory twist throttle on the right handlebar. I found this in the manual but I'm still not sure what to do now because I don't know which aftermarket throttles are compatible with my bike. Does the throttle have a cable that goes down the...

I have rode this A2B Metro.for.a.few years now and has been pretty reliable for me. I give it the proper maintenance and keep it clean. However about a month ago, The bike would start making this noise and/or would jump forward every.time I turn the key off (posted in the video) I know it's...

Thank you for your obvious insight.

I'm curious if anybody else has had this issue... Lately my throttle has a mind of its own. Three or four times now, If I park it and forget to turn the key off, the bike will just randomly try to take off! I park it inside and twice now I've come into the room and noticed my bike slammed...

I've used 13s2p batteries that I bought on eBay because you can fit a couple of them in the frame.

I could really use the rear fender. If you or anyone else has one. Please send me a message

So would this one work? https://www.ebay.com/itm/Park-Tool-FR-1-3-Bike-Freewheel-Remover-fits-Shimano-5-6-7-8-9-10-Speed-1-2/222153495484?epid=2256001580&hash=item33b96153bc:g:Yo8AAOSwNrNdKotZ

On my A2B Metro, Which type of took is required to remove and replace the freewheel? by adh247 » Dec 06 2020 1:52pm Hi guys! Ive had This A2B Metro going one year now! Whoever owned it before kept in great condition, but just like an old barn find car, you still need to tender to it every once...

I've had this A2B Metro for about a year now and last week I noticed this clicking/grinding noise coming from the freewheel. I took the rear wheel off and did my best to lubricate it etc but to no avail. It still makes this noise. What would be the best way to go about this...

Hi guys! I have an A2b Metro and thought I would seek advice. If The Batteries in the frame aka "A" Battery are in perfectly good working order, but the BMS is not, where would I go to find a working BMS? Would Something like this work for me...

Hey Amberwolf, you nailed it! I took apart the new battery and went over it with a fine tooth comb and what I found actually astonished me! The ground cable that is soldered onto the bms was barely even hanging on! As if someone did a poor solder job to begin with! So basically I went In and...

Thanks so much for the response, I'm going to go take the battery out and test them all. I'm so glad you mentioned this because it reinforced what I thought it could be. (I tend to doubt myself when it comes to problems with it) One thing that bothers me is that this is a new battery thats...