Recent content by ancan

Doesn't look complicated. Think I'll try it. Thank you!

Thanks. Wonder where that can be... It was not any dirt inside when I took it apart today, but should probably replace it.

Yes correct, you are right and I am embarrased :oops: . I had time to forget that.

I all! I posted earlier about my bike making squeaking sounds, but didn't get any replies so I thought I'd try again. I'ts caused by the crankset grinding on the main gear cover, and clearly seems like some design fault or the consequence of something worn out inside so it can't be that...

(Sorry if this is a known issue. In a hurry and have just quickly searched the thread without success). I'm on FW 1.1.0 with a 850 display, and the shortcut to turn on and off street mode doesn't work. I can toggle it on the configuration menu, but not by holding down+power. No issues with the...

What causes this wear, and is there a proper fix for it? My bike have been squeaking like clown shoes lately, something that I see other have had problems with as well. Today I finally got to taking the drive side apart, finding that the plastic cover have been worn down so it's soon a hole in...

Thanks! Already ordered the BMS I linked above. The charging connector have been acting up lately, having needed a bit of persuation to unplug the plug. But there's no shortcut in it at the moment. I've bought a new one. Luckily the local store had one identical that will fit nicely into the...

In the desciption on the BMS I'm about to order (https://www.ebay.co.uk/itm/254484111612) it says that connecting the charger will reset the protection circuit, so I though I'd try that on mine before ordering. Connecting the charger resulted in a POOF, and a melted charger connector...

Thanks! Picture is uploaded now! I did what you said and measured each subpack with a bulb in series, and all showed ~4V. Then I measured on the connector to the BMS, and they showed +4, +8, +12 and so on, all the way up. All seems fine so I guess I'll order a new BMS then. Edit: The white...

Hi all! My bike suddently lost all power during a ride. I'm rather OK with electronics but haven't been tinkering with these kind of things before so I'd thought I'd ask the expertise before I order any new parts. So I've got a black display, no LED's on the battery pack, no power, nothing. I...

I'm a bit disappointed with the power output consistency since I upgraded from the KT-LCD3 to the 850C, and the later firmwares, and wonder what your experience is. With the older stuff I felt there was a pretty consistent power output as the battery discharged, and I could keep the same assist...

Will do.

My clock is also completely off every morning, and I turn off using the power button.

I've got a problem with flickering headlight that is connected to the TSDZ2's light connectors. It's OK from start but when voltage drops under 50V the light gets more and more unstable. I assume this is due to crappy voltage regulator on the 6V output. Unfortunately when it gets really bad my...

Lean bike against wall, hold brake and stand on pedal.