Recent content by Atdit

I installed the controller and tested out my bike. Three Speed at 120% allowed me to get a top speed of 54kmh (without peddling ofc) with a fully charged 18S 5.2Ah battery. Thanks so much for telling me how to upgrade the top speed. I was so happy when I tested the wheel in the air and it was...

Is this battery pack possible? (See picture) It puts 3x 6S 10Ah LiPos in series and 6x 3S 5.2Ah LiPos in parallel. I think it won't, but what should I do with my 4x 6S 10Ah LiPos and 8x 3S 5.2Ah LiPos? How should I wire them up? Should I just do 2 seperate battery packs, 18S 10Ah and 18S 5.2Ah...

I used 8x 3S 5.2Ah, twice 4 in series and then in paralell to get 44.4V. I ordered a few 6S 10Ah batteries on Hobbyking, 4 actually. I wanted to get a 12S 30Ah battery before I found out here that I need a higher voltage to get a better speed. I will use a 18S 15.2Ah battery for the 72V...

I use LiPo batteries, 3x 6S 10Ah 10C in series

I didn't figure out how to change the winding settings on the ebike simulator :? I think a 72V 1500W controller would make my bike go fast enough anyway. Would this controller work...

Thanks. But seriously, would the motor work at 72V/75.6V? That would be crazy. And what about the wattage?

Thanks for so many replies and advice! I can't open the motor right now to check what it says in it, but I fear that it is a 6x9 motor. It is most likely a cargo motor. I could ride uphill with my friend on the cargo rack at around 13mph, which was pretty fast. I didn't even have much momentum...

This here is the motor btw http://www.mxusebikekit.com/proshow.aspx?cateid=68&productsid=199 It is rated for 32kmh / 20mph... does that mean though that it can't go higher? The seller claimed 45kmh / 28mph.

Hello members of Endless Sphere! TL;DR is below I'm having a lot of trouble with those stupid speed limit functions in each controller. :? When I first bought an e-bike conversion kit with a motor rated for 48V and 1000W, it came with a controller which had a 20mph speed limit integrated, and...