Recent content by azneinstein

I had a Risun Sun/Conhismotor/Hallo motor... etc... from what i could tell, they're just one of the better/higher end Chinese ebike suppliers. But unlike the higher end companies - they used the generic controllers - KT lcd displays, etc. So if you take a picture of the connections on your...

PMed about the frame

So I've been wrapping my brain around this but there are so many factors that I wanted to see if I'm correct: Affected Areas: - Motor RPMs - Cadence - Top Speed - Climbing Ability/ratio - Motor Efficiency - Motor Power Draw - # of teeth engagement - Wear/Maintenance So I built a 29er SS...

It's from a kit I bought online, unfortunately it's a re-badged kit, the problem I have is that I don't won't to cut off the end yet because of those 4 pins? If it was just a pos/neg two pin plug, I'd be more willing to do that. I bought it off Ebay because it was listed as a 20" tire and...

I saw that one... unfortunately this one has one additional pin below the main two. Hence why the issue finding it.

Not sure if the file got attached correctly but this cable: https://imgur.com/a/u0auRab

I'll have a picture of the full kit when I get home but I ordered an open box kit on ebay. Lo and behold, it has everything except the "battery" cable. The kit is terminated by Higo? connectors. Controller current connections-> - (2) brake levers - PAS - Motor - Display - Throttle So I can...

So I really should have planned ahead as my build slowly got less and less ambitious, but I thought my first real posts would be showing off my build but I don't even know what happened on my first test ride. A little background, I do work in a shop and I've probably built over 30-40+ bikes...

I'm not a lycra racer, but though I'm still new to e-bikes, I've been a cyclist for a while now and it's more of- as I slowly built up my first ebike, my ambitions slowly got lowered as battery fitment/weight, a whole multitude of problems arose. Whereas all the most exciting builds lean...

So in San Diego, there were proposed plans to finally build this huge dedicated North/South Bike lane but was debated because some planners started arguing that what if we're not a "bike city," and that building bike lanes would help get people biking but building extra car lane would actually...

I know this might sound dumb but I'm curious why nobody, including the Chinese, have tried creating a Vivax clone or copy yet? I mean, if we're talking about a technology that is lightweight- race proven- stealthy- very low/centered weight- can use the entire drivetrain... I can only think...

I'm wondering if somebody that maybe has both a 26650 battery and some 18650 batteries and how many 18650 would surround 1 26650 battery? I have this idea of a copper plate fitting the shape with soldered Beryllium springs...

Most handcuff keys are universal... I know however, Masterlock does make a set of bike locks in the shape of cuffs that I wanted.

So you want somebody that has used those forks... Well I have, and I've been riding mountain bikes for a good while now. IMO, the best forks you can/should buy on ebay for the money will either be the RST First Air shocks, or the Suntour Aion/Raidon types followed by the new Rockshox Recons...

Alright, stupid idea time! I'm just curious with products like the Ridekick and with the abundance of Electric scooters with dead batteries, I've seen tons of 48v-72v scooters for less than $300. Which begs the question, can I just take the hubmotor/rear swingarm off the scooter and have it...