I have a spare one still in the box which i can use for testing. At this moment somebody has my bike with him on a holiday. When it is back and still needed I can test it. Or can i also test the procedure without being connected to the tsdz2 motor by only power the sw102 lcd?
I made a light icon in gimp and then tried to vectorize and scale (12x18) it with inkscape but no good results. Probably to small?
I just upload it here so if somebody else want to try or use it for other displays.
example:
gimp file:
Hello Casino,
Good idea to make a drawing!!
At this moment I only use the font from ugui in the sizes 22x36 (for assistlevel and speed) and the 6x8 (for time and BRK).
The battery icon from Nick is 24x12.
Hey Nick,
Just got everythig up and running and did some updating by DFU it really works nice!! :bigthumb:
Also had an look for programming the layout of the lcd. Did you make the battery with je picture and thedotfactory?
If so can you share the picture or how you done it?
I will have a...
It was indeed a bad connection of one of the wires. Now everything is working!! :-) and got the example running.
@Nick:
We are missing the file nRF5_SDK_12.3.0\components\softdevice\s130\hex\s130_nrf51_2.0.1_softdevice.hex in the 12.3.0 branch can you add that to the branch?
I had some...
I am trying to get my sw102 up and running. I connect the sw102 to my stlinkv2 and setup my Eclipse env.
I try to flash something tho the sw102 but I am pretty new to this so I have some issues.
I tried to flash_program and my stlink was blinking red and blue and no errors. I tried again and...
I did some researching on the internet and come to the same conclusion as Niek.
For point A) not the problem of this project but of the shop selling those devices --> the best way would to explore the possibilities with Topologie. But as Nick mentioned I think they already explored this and made...
Vervy very nice and good work Nick!! I hope to receive my sw102 in the upcoming days.
Hopefully i can help on some simple parts (no experience with embedded programming).
But very nice work :bigthumb:
Hello cnrd,
I don't know where else to order this 1 to 4 female cable. In the past I ordered some cables from: https://www.e-bike-technologies.de/index.php/de/steckverbinder/steckverbinder-signal/steckverbinder-higo-z812-serie
and soldered it together except the brakes but still have to do that...
Maybe this questions is asked before but can't find it somewhere:
Does the "chinese" sw102 (say around 50-60 dollar) also have the Nordic microcontroller with Bluetooth (nRF52)?
Do you have a picture of how your lcd is connect to pins on the stlink clone?
I couldn't find it on the wiki's. Do you let the lcd power from the "normal" connection or do you use the 3.3v on the printboard?
Any tips on where to buy the sw102 lcd in Europe (if possible)?
Thanks.