For me it seems to be the best combination:
I got it made : òne driveline 14 gears with Lekkie 40t bling ring, and heavy Ebike chain.
Any thoughts on this you guys, pro’s and con’s....?
Any advise for installing a E- gear shifter?( and the need for installing it).
I used to have one in my...
Problem solved!!!
Thanks to you all, giving me the right values.
I’m very happy and of course saved these precious settings.
Learnt a lot, due to this fantastic forum.
Now up to the next update: placing a Rohloff 14 speedhub driveline, and finding a space for a 48v 50Ah lipo battery (13kgs) to...
@HrKlev and helping others:
You’re right I’ve played to much to get a safe working setting:
I configured my settings just as you advised:
Even still the same behavior
Here the pic’s:
Any further advise to get the right settings?
Thanks in advance, hoping to get it right before the lockdown is...
@ZeroEom,
As I wrote The wattage corresponding with the pas steps, but I feel no difference between them in more assisting power, step 2 seems the same as step 5.
Thanks for all your replies guys,
I got the original BBShd wiring harness from Grin...
I’ve been playing with Sévery setting to cure my problem: today the system didn’t shut off, but I can’t feel a difference between level 2 compared to level 5 : I feel no difference...it seems to be all the...
@Jenming:
I have an identical setup
How did you wire up ( what colors) the connection to the middle button of the 3 button Grin auxD
At Grin’s website never found info about it.
Thanks in advance !
Thanks for your replies guys,
As you described I programmed my digital ( aux) switch in 5 levels, (500W level 5 max assist)
I have the same result with lower power levels.
1 ). no assist ( ordenary human power)
2 ) 500/4= 125w gives a huge abrupt wheelie
3 ) 250w
4) 375w
5) 500w —————-all the...
E-HP , Thanks for your reply:
As I said I configured my 3 button slim D-aux to switch pas levels (5)
Level 1 no assist
Level 2 -5 a no smooth start issue ( like the way it did with the stock Bafang controller) therefore sudden uncontrolled power and shutdown of the system by CA3 or Phaserunner...
Hey guys, I’ a totally newby struggling hard to setup my DIY E bike :
Motor: Bafang BBSHD no stock controller, no Bafang display
Controller: Grin Phaserunner MT latest model , configured with BBSHD settings from Grin website
Original Grin harness
Cycle Analist v3 connected to Phaserunner
3...
Yep!,
Does the Phaserunner do something with the BBShd so that the stock Bafang controller ( a new one) gives no signal to the phase wires to let the moter start....
Bafang screen works ok, but NO motor spinning.
When I place the Phaserunner ( the latest one) the motor works fine.
Hello you Ebike guys,
Sorry for my bad English...
I’m a total newbie and very happy with this forum!
For some time I took off the Bafang Stock controller for experimentating with the Grin Phaserunner v3 icw CA3. ( borrowed from a friend)
I did the autotune program to match the BBSHD to work...