Hi Allex.
I read that people experience some noise problems from the belt. I have some questions about the front hub.
How is this made? Material, machine proces from one piece or press fit from 2 parts?
Is it possible too fit the hub both ways or is there a turn direction?
Lipo is full. Did you see the photo with burned cell head!? This did not happen because off a underpowered lipo i guess...
Nothing is burned only a little electric smell near the FET,s.
The machine work as it should now but no weld. It did not at firts. Now there is no FET error anymore but no...
Hi,
How many FET,s do i need? Something went wrong today with my new welder after 200 welds or so. It blew a hole in my cell and i have fet error now. If i try to weld it works but there is no current send to the pen. Guess i,am the next guy with bad luck :(
Opening the motor was very easy! 3 screws and 1 nut. I took the white grease off and greased it with Mobilegrease 28. There is still some noise but it looks like its not from the motor gears but i think from the freewheel. I take a look at my old Shimano deore LX wheel tomorrow if i can swap the...
Hi,
I would set P5 to zero and go for a testdrive. Now watch the battery indicator under full load.
If you get home first thing to do is messure the voltage on the pack after 10min setteling time. Not start charging right away!
Display manual...
I think i found my motor. Its a XOFO XFCK motor. I try to find the magnets count for my C3 settings but no luck. I contact the manufacture with some questions.
Its the first motor in the list:
http://xofoeurope.com/en/rear-motor/
Okey thanks guys!
There are indeed 5 or 6 crosshead bolts behind the cassette. The motor is sold as a 250w FX motor.
I added 4 more magnets but it did not work at first. So i got thinking that they are maybe to big. I swapt them for smaller ones and eureka it works!!! That makes a lot of...
Hi there.
In need some help to identify my (MXUS) motor.
I like to know how it looks on the inside and how to open it. It makes a little to much noise in the highest pas mode (5). I ordered some mobilgrease 28 for it.
The C1 setting in my KT-LCD1 is 88. It came this way from the seller and the...