Recent content by Blackgolem

So in short 20s12p = 2 20s6p basically combined. My math was wrong then because I was thinking ignorantly that I was measuring amps via the string of 20 cells you know coming up with amps I wanted

Very knowledgeable amberwolf thanks for not stringing me along. I actually thought likewise on all issues of this controller and being as it will be used with a 20s6p battery pack using 2.5ah cells with 7a discharge planning to add 4 more parallel rows. I'm thinking I could get at least 100a...

Thanks amberwolf saves me a lot of headache will this controller auto detect voltage applied perhaps I mean it doesn't have the green wires that switches to 72v and could 80a mean it's limitations so below 80a is workable from your perspective? I know its off topic but if you'll set me straight

Okay so I must need to see my own questions to find answers 🤔 and doing the research I will have it posted here. So what I've found so far is that at the 8 pin connector the RX: = the receiver pin of the dongle, TX:= the transmitter pin, CLK:= trigger pulse signal and if I understand that's...

Hello everybody right into it. I bought a em-100 80a controller it says voltage range is 60-72v. I've notice the surron controller has 2 green wires connected switch from 60 to 72 and this don't. Looking at my photos can anyone point me to area to connect that. Also I see a round 8 pin...