Recent content by boeb

Hey, Back with an update. So yeah most of you were right apparently the cable was broken.. I'm not sure how that happened but at least its fixed now. The motor cables seem to be pretty fragile

Thanks TommyCat! But at the end Ive sent the kit back to germany and the company has excepted to do a repair. Shipping was expensive but I should of probably done this from the start. At least i've learned quite a bit trying to solve this. You guys have been amazing with your tips and help...

Not working :( I used one of those springy wires that holds the allen keys.. I managed to get it all the way in both holes but no response I guess the hall sensor really isn't working. God knows how that happened..

Wow didn't realize u could do this with just paper clips, I guess its obvious! Im really a newb.. How about guitar string? does it need to be a specific kind of metal?

I think I found the wires I need. Would this do the job or its too thick? https://www.amazon.co.uk/65pcs-solderless-breadboard-jump-wire/dp/B007T9GUZY/ref=sr_1_4?keywords=jump+wire&qid=1555436240&refinements=p_76%3A419158031&rnid=419157031&rps=1&s=gateway&sr=8-4

All makes sense now..

Your probably right. I was actually thinking at the end to go to a shop for a diagnoses but its so expensive! I spent almost all my money already on this bike :( I just have a hard time understanding what you are describing but I think Im getting it now and yes it does seem like a straight...

Thanks guys but this is going a little over my head.. I tried messing with electronics but I just don't have the right experience. Im thinking of just ordering another LCD3 and see if that works, and if not ill just send it back. Thats not a bad idea right? Im really starting to think that the...

I just realized that the screen is also giving me wrong battery level after fully charging the battery. Used to not do that..

I have the impression that maybe it's the lcd screen which is not working, is that possible? Or the controller or motor I guess but I don't see how. Has anyone had a faulty KT LCD3? How could I diagnose this?

That's the one. So here are the settings on default mode : P1 87, P2 1, P3 1, P4 0, P5 15, C1 02, C2 0, C3 8, C4 0, C5 10, C6 3, C7 1, C8 0, C9 0, C10 N, C11 0, C12 4, C13 0, C14 2.

the only way I can manage to share photos https://www.facebook.com/blatinov1/media_set?set=a.2789938657699933&type=3&uploaded=5 Both motor cable connections and cable coming out of the motor

This problem only started happening after I changed the settings on the screen. It was perfectly fine before, didn't touch anything else, the bike didn't fall or anything like that, and hadn't touched any cables prior

arrows are lined up all the way in almost touching each other, would provide a pic but can't manage..

I tried but cant get the motor to jerk, however i sometimes am able to get the little symbol to spin before going to the error code but with no jerking. I tried to post photos here but they're too big in size apparently. Not sure how to do it The cable does seem completely fine though