Recent content by chilltrout

  1. C

    Sabvoton 7280 Bluetooth controller

    I sent you a PM have you got a price in mind?
  2. C

    Cycle analyst wanted in Australia

    Hi all! Lost my caV3 in the brisbane floods and need a new one to get back up and running! Anyone have one sitting around they wanna sell?
  3. C

    TSDZ2 OSF for all displays, VLCD5-VLCD6-XH18, LCD3, 860C-850C-SW102.

    worked perfectly thanks mate!!!
  4. C

    TSDZ2 OSF for all displays, VLCD5-VLCD6-XH18, LCD3, 860C-850C-SW102.

    Hey mbrusa is there any chance you can compile an swd version of the 2021 850c display code I stupidly flashed the non-2021 swd firmware before I realised the 2021 version even existed :(
  5. C

    Where i can get one of those goofy 'super 73' / scrambler 20" wheel frames?

    he wants a way too much money and is really obnoxious about shipping. I'd rather give the sweatshops the money tbh Im not gonna part with more then $250usd for a frame like this. I cant see anyreason something like this is worth more then a kmart bike
  6. C

    Where i can get one of those goofy 'super 73' / scrambler 20" wheel frames?

    Anyone found one of these frames for sale yet?
  7. C

    Aussie, Brisbane & goldcoast people

    Should boot these rides back up keen to get in on one!
  8. C

    Kepler Bottom Bracket Friction Drive For Sale (Finally)

    Keen! will send a pm!
  9. C

    KT motor controllers -- Flexible OpenSource firmware for BMSBattery S/Kunteng KT motor controllers (0.25kW up to 5kW)

    Bad phase or hall wire combo? is it gutless and the wires to the motor get hot when the wheel is loaded?
  10. C

    kt-lcd power cutting out

    I had a KT controller doing this, ended up redoing all the wires to the motor thinking it was the halls because I could max out the throttle on startup if the wheel was unloaded but had to put a curve on the throttle and take off slowly to go (doing the halls did fix the cutting out at startup...
  11. C

    Coast -> throttle apply -> dead. KT72SVPRK + KT-LCD3

    Did you ever sort this out joe81 I have the same controller doing the same thing :?
  12. C

    $14.99 72v Sunwin Controller

    Can anybody help me with something? I just want to confirm that the throttle pad is "ST" I am adding a CA connector and having some issues with the throttle
  13. C

    Cycle Analyst V3 preview and first beta release

    Ok so it turns out that it was the gnd cable in the CA plug on the controller side!!!! It had blown in half! wasn't even a trace! But now the controller is doing strange things and I think one of the groups of fets are dead :( I forgot to mention that when the CA died it went wide open...
  14. C

    KT motor controllers -- Flexible OpenSource firmware for BMSBattery S/Kunteng KT motor controllers (0.25kW up to 5kW)

    So I have 2x 72v controllers running stock but they are doing something weird I am running a 18s rclipo pack and the LVC should be perfect The controller was running fine for 2 weeks but now it keeps thinking the battery is empty, even though its fully charged and I have a xiaoxing bluetooth bms...
  15. C

    Cycle Analyst V3 preview and first beta release

    Hmm so more tests This is with 12v between LCD+ and gnd And this is with the 12v + battery voltage (which is around 72v) The ~59.4v the screen is displaying seems like my batteries voltage (minus) 12v? So I'm guessing something in the regulator circuit is dead, But I'm getting 150kOhm...
See more
Back
Top