Recent content by ComradeM

I'm also interested should 2Intelligent not take it.

I'm by no means an expert in this area but what wires are going in and coming out of the controller? A hub motor will need three phase wires for power at the very least and the controller will need to have two wires for the power coming in. Does the controller have five smaller wires coming out...

Yes it does. They sold me a 52V battery with the controller. The controller I have is 25 amps but they have/had ones that went up to 40 amps iirc. If you have the money for it, the Phase runner is a great option.

I bought one of these from Grin years ago and it has served me well. I got a large collection of ebike parts used and within it was both the same wheel you have (X5304) and another controller that is almost the same as the one I bought from Grin. I'm literally in the middle of rewiring the phase...

I realized this morning I had a DrainBrain in amongst a used ebike parts purchase I made recently and that could at least provide some information on the amps the controller pulled. This unknown controller pulled 22.5 amps when I hooked it up to my 52 battery. In comparison, I hooked up my 25A...

I've searched around both generally in Google and GIS as well as within this forum but haven't been able to find information on how to verify the specs of a controller I got when I purchased a used hub motor a few years ago. Based on the appearance I'm fairly certain it is a Crystalyte...