Recent content by craiggor

Yes good idea. May I suggest that you use the word Xiongda in the thread about your bike makes it easier for people searching for anything to do with the double speed motor.

Was that $130 each for just the motors ? No controllers and displays ? I will be following your posts with great interest.

Hi BARE, I live in a hilly area of the UK, I bought a 2 speed motor years ago when they were new to the market. It broke twice Xiongda were more than good dealing with the problem sending me free parts to fix my self. The motor is now retired to my sons attic with just over 5,000 miles on it, I...

Thanks

How much is the double speed motor, controller and display posted to the U,K. ?

Look on you tube on how to make a simple angle iron sheet metal bender.

Just fitted a cheap rubber valve stem 1.75 inner tube in my 2.35 fat frank tyre and the tube seems to be slipping inside the tyre.Angling the stem within 5 miles twice.Correct size tube on order.

Read an old motorcycle book "Speed and how to obtain it" it recommended drilling the rims in four places each side and fitting self tapping screws. Trails and motocross bikes now use rim locks. Don't know if you can get rim locks for push bike sized wheels maybe someone could 3d print some.

Sorry shouldn't have said motor shaft. The motor spins around the axle the axle is bolted to tbe bike frame the plate is attached to the axle with the key. The motor has a small fixed metal cog that spins the planatery gears. See the 62 page thread on how the motor changes gear by reversing and...

It uses a small oblong keyway and key on the motor shaft and plate.

Bruce Teakle has a new video on you tube "Xiongda 2- speed hub motor with slipping motor magnets" link on the video to his blog on how he fixed it. He was lubricating and cooling the motor with ATF but does not know if the ATF caused the magnets to loosen because he has run another Xiongda with...

See pages 42/49 of this thread for my pictures of the first time I striped both the sun gear and planetary gears.That day my clutch was rattling the most it ever had.I set off on the flat and it striped then I changed gear and it striped again. I stretched the spring which seems to have stopped...

Makes me smile when people say don't push your bike backwards. I'm getting better at lifting the bike when moving it backwards after replacing the sun gear. Non Xiongda owners must laugh every time they roll their bike backwards "there goes another Xiongda motor ! " I stretched my single...

When mine broke I noticed on pulling it apart there was only one spring in the clutch the pencil is pointing to it. In the line drawing there is 3. I asked Bonnie about this and she said that one was normal. I'm not an engineer but surely this is something to do with the clutch locking and...

Computer illiterate tablet user here if you could just bend a little and bring back tapatalk I would be very greatfull.I find it easier to navigate the site,post pics.I like the way I can change the back ground to black and I don't need to zoom in to read.I also like the app because it puts up a...