Recent content by Craigh85

The bike looks great. Any footage of the bike in action? It would be good to get an idea of the performance of that motor and controller setup.

Can anyone confirm the APR48 works ok in series with another? I have two I'd like to achieve 93.6v for 26s lifepo4.

I had problems with my max e and domino throttle. Tried the 100ohm resistor but made no difference to mine. In the end a second cheap left hand hall throttle setup for variable regen fixed the issue. Craig

I've not checked the resistor value yet. Didn't see much point as the halls still had a supply voltage at the connector. Unless it's on its way out and is verging out of spec. Weirdly today I went out and powered up the bike. The fault has gone. Nothing was changed. No idea why. Intermittent...

Can anyone help with this one? MAX E Halls error issue. Read through the thread cant see anything the same. Took the bike out for a ride, all went well. Got home charged bike, cleaned etc when suddenly I got a halls error on display (no issues during the ride). After a quick look over the...

My domino throttle problem also does the jerking/cutting out at wot. I'm still convinced it software related because before I was forced to update because of the display issue the throttle worked perfect. Can you get the throttle to go through an auto detect? Mine wouldn't. I have a copy of an...

Spoke to Oleg at adaptto. He sent me an earlier firmware version to try. He also mentioned putting a 100 ohm resistor between throttle 5v and ground, it has fixed the issue for others. I'm working away from home just now and unable to try yet. It's mentioned in the stealth owners thread if you...

Installed the Max E today all went well until I cycled the controller off and on. The display locked itself into a flickering loop almost like consistent failed boot up attempts. Anyway updated firmware to latest via adaptto website and the fault has cleared. But now my domino throttle gives...

Finally got round to hooking up my spot welder today. Managed around 200 great welds using a 12v car battery, then for some rrason unknown to me a blue flash came from the welder. Now I'm getting nothing. Green light still shows when I press pedal but that's all. How do I go about fault...

I see what you mean now. Think mines is different I just have the regular holes. Thanks for the help anyway.

Cheers Routy, So how does that work do you have to modify the motor side cover or make an adapter. The bolt holes on the motor don't allow me to mount the rotor further out. Let me know how the Max e performs (Temp) inside the frame I bought the external controller casing from vector to mount...

Some progress.. Getting the phase wires to clear the brake rotor is proving to be a headache.

As the title suggests its time to build a new bike for the summer. I fancied a change from bicycle frames so took the plunge and bought a vector frame. I've managed to collect most of the main parts just starting to assemble it now. I currently have .. A vented vector frame. Adaptto Max-e...

Looks good Riba. I'm keen for a DIY kit, hopefully I'm not too far down your list. Already got a huge 120ah battery :)

I'd be happy to pay up front if that's what riba wants/needs. I'm in no rush to get the welder either, so no pressure.