i inspected the cables and connectors etc and could find no faults, but did a bit of digging around and have found out that there is a warning on( uk rinsun motor) display page saying display must be turned of before switching power off at the bike so looks like display is most likely fried, i...
I am really baffled on why my display fried i wouldnt think leaving lcd screen on would matter when switching off key, im wondering if key switch is mostly likely rated at 12v i have no idea tho, but if it is could that maybe be the cause?
I managed to find a good picture of my controller online and have uploaded it here hope this helps to give better understanding of my wiring .number 4 is display connector & number 6 is ignition.
Hi yeah sorry when I say adapter I meant connector it's a 5pin jst connector the ignition wire is looped from red live from lcd connector with live from controller so when egnition is turned on the live loop is connected .I try and get a decent pic or see if I can find decent pics online. Thank...
Hi here is links for controller . Also has wiring diagram
https://sabvoton.net/products/mqconsabvoton-electric-bicycle-controller-model-svmc72100
Link for key switch.
https://www.ebay.co.uk/itm/184814140943
and link for uk-c1 display Manual
http://siaecosys.com/upfile/202003/2020030462327201.pdf...
Hi everyone I'm new here , I'm in the final stages of building my bike but I have ran into a problem my controller is a sabvoton 100a it has a 72v ignition adapter on the display side. I wired up an egnition key too this adapter, it switched on bike with no problems but I left uk-c1 screen live...