Thank you for your input…!
I’m pretty sure that I will not have a problem with the bms as I have never even seen a small cheap eBay 20a bms rated at less than 10a max charge current.
But your are right … can’t guarantee it…!
The 2 reasons that I wanted to charge with my cv ca power supply...
Clarification:
I measure 10.4v from ID pin to Ground pin while charger is plugged into AC (but not connected to the battery).
There is no voltage on the Positive pin … as expected.
• Cells are Samsung 35e and std. charge is 1/2 C.
• I measure 10.4v to the labeled neg. pin
• on closer inspection of the charger boilerplate .. the 3rd pin is labeled ID (not T as I might expect if it connects to a thermistor in the batterypack ☹️)
I thought maybe matching the normal...
Just bought a new Ride1up Prodigy mountain bike.
To my dismay .. the charger is only 2a … while the battery is a 14ah (36v) that can safely charge at 5A.
The battery connector is a funky configuration that I have never seen before called a Stellar 3 Pin.
The 3rd pin is probable some sort...