Recent content by dean74

Edit - Grin have gotten back to me on this issue, and tell me the 5v signal on the mains cable should not be affected by the TRS plug - these guys know what they're doing so I don't doubt that information, but for my 2 BR controllers whenever the old TRS cable is plugged in, the 5v to throttle...

In case you've fast forwarded to the end... the original issues have been resolved personally by Paul from EM3EV, and while it took a long time for this to happen, I respect the way Paul is trying to make things right, so have removed the relevant posts. If going forward the business continues...

(Posting this for reference in case someone else is trying to do the same thing... I have an old V2.0 cycle analyst, (the small screen version) that I wanted to resurrect to use with a slightly less old Grin controller. Pics of both attached. The controller has a note on it that i need to add...

Hi All, Thought I'd share this, my Ezee motor's clutch has just failed after around 8000km. Please note this is not a complaint, I know I'm running this little motor well above recommended settings, just sharing my experience. It's the 350rpm cassette version, running a custom 4p14s pack...

post deleted as issues have been resolved.

post deleted as issues have been resolved.

UPDATE AUGUST 2022: Paul from EM3EV has eventually gotten back to me and refunded both the defective battery and charger. Very unusual to get product support after so much time has passed (2 years), but it seems Paul is keen on making things right, which I respect. I cant fault the final...

@ teklektic - did you need to experiment with the phase and hall wiring to get the autotune to run, or just connect colour to colour? I've setup a phaserunner on my personal build, but that system was supplied by ebikes.ca so the plugs matched. wondering how i'd go trying to run autotune if...

Have been meaning to update with my experience on this... which is so far really good. So i have the Ezee 350rpm motor, Phaserunner, 29in wheel, running 58v (14s lipo) in a carbon mountain bike setup, total weight is a very skinny 18kg! Phaserunner is configured to 45a battery current limit...

thanks cycborg, problem solved! I'll put some real temp data up here once I get the bike finished. stay tuned...

Some details of my retrofit on an ezee 350rpm rear motor (cassette freewheel version). First the pics... I'm building a 29er with ezee motor and phaserunner controller ~60v battery capable of 50a continuous. Which adds up to a bit more than the ezee is rated to in the basic specs, but am...

Hi all, have been reading this thread with interest as I'm currently building a new 29er bike with ezee 350rpm rear motor and phaserunner controller. I see that no one seems to have a thermistor on their ezee motor... so here are some pics of my retrofitted thermister. I wanted the...