MUX has larger Phase wires Heat sink and Ferro fluid
Lipo Battery
Eaton 1800w charger
Fox Bomber front forks, Fox RC2 rear shock
Shimano Zee Brakes front and rear
Mavic Rims, Hook worm tires with a new spare
Range 100k normal riding, 140k with peddling
Lights Horn and rear Blinkers
Cruise...
I asked this in the Main controller thread as well, so sorry for the double post
Just have a couple of questions on hooking up a Bake Light through port P1.
I have the brake switch connected to IO8 on the display and I set port P1 to Spec. and PWM to Stop-Light.
Should I be able to see, using...
Just have a couple of questions on hooking up a Bake Light through port P1.
I have the brake switch connected to IO8 on the display and I set port P1 to Spec. and PWM to Stop-Light.
Should I be able to see, using port state, that I have a output signal on P1 when I use the brakes?
Also do I have...
Hi,
Did you find what the problem was when the motor stutters.
I have the same problem. Motor starts smoothly then stutters at about half speed.
MXUS 3k
Eddie
Hi,
I have a PW-X2 and am building my own SpeedBox. Do you know if there is 5v to power a micro controller in the wiring harness and what wire?
Not the light switch power as I want to use that to change modes.
thanks Eddie
Hi,
Is there a link to what order number you are currently up to.
Gives us an idea of how far away our order is.
Thanks for a great controller and your online support. Can't wait to get mine.
Eddie
Flippy
What would you change on his battery Build?
I'm about to do a EBIKE battery build and would like your input
Just a medium power 16s 8p lion
Thanks Eddie
Was that 400amps at about 100v? IF so 40kw max and about 10kw for cruise.
So it looks like your 25min flight took about 5 to 6 kw.
What battery capacity do you have.?
Looks and sounds great.
Eddie
All good ideas.
But for me,
External switches to change modes and to set cruise.
Separate external (hidden) switch and mode for a low power police safe setting.(AUS)
Bluetooth.