Recent content by fi7ippo

Hi Andrea, Yes, I do the same. I've installed two thin (0.2mm) teflon rings between the coils and no more wear happened. Before I've to replace the whole torque sensor two times because the magnets fringed each other destroyed the windings... After the modification I've made at least 4k km and...

Hi mbrusa, I am also interested to try the sw102 version, if you share. Does the display will be update by Bluetooth? Thanks You

Hi AZUR, thanks you, yes, I know that. The 63v is our voltage endpoint also the motor controller has a 63v capacitors, so we cannot go over this voltage, maybe a bit less is better! How high do you charge your 15s battery? I'm very happy that @beemac share my vision, and works on implement the...

Thanks You maximusdm! This is a really good news. The field weakening is the only missing things on LCD3 in my opnion. I'm available to test if you share your hex file!

Hi mbrusa does the ESP32-v7 work with LCD3 display?? Thanks You

Hi casainho, I'm was far for a long time... I've no words, your work is awesome! I've some questions, please take a look when you have some time: I own a 15s battery a bit undercharge for my setup (I use BT BMS for set 4,09 maximum cell voltage, so a total 61,35v full battery) whit SW102 and...

Hi geeksville, I'm very happy to see this project! I think that a nema8 is good choice...

Hi casainho, I believe in the multipoint calibration how to edit the tab values? What is the formula for insert our weight data? Thanks You #define TORQUE_SENSOR_LINEARIZE_NR_POINTS 8 uint16_t ui16_torque_sensor_linearize_right[TORQUE_SENSOR_LINEARIZE_NR_POINTS * 2] = { // ADC 10 bits step...

Hi Buba I'm trying to build myself the pwm branch for modifying a value, but no luck, the program exit with a warning 126: unreachable code.. I think I did something wrong because also the master branch of casainho exit with same warning when I try to compile it! Use SDCC ...

Hi FedeleC, I'm very interested to Your project! Do You make any progress? I don't know if putting the servo on the derailleur is the best thing because of its weight on the gearbox. It would probably be easier to use with any derailleur if it operated the stock cable (much shorter, since the...

Hello Buba, I've done that, some odometer field was fixed, many parameter was reset to factory default after step 4 Backward resistance is present (only at the boot, no more present after powering the motor) Odometer temp "Options 8" not show (is no important I set it to temp field) Torque...

I've tested the torque mode. I think single mode + emtb at the end! A trick for cadence calibration: You must lock the crank to the crown so that the motor rotates the pedals during calibration

Hi Buba, great work! :thumb: My motor is really more quiter than 0.19.0 with same configuration. The acceleration is much smoother, the power seems much better modulated. It looks like a new engine :D Take a look to backward resistance, is present in Alpha 1.0 and... Odometer says over...

Hi guys, I have recently installed the brake switches bought a year ago and never installed due to lack of time, and I must say that enabling "startup without pedal rotation" the feeling especially at the start is fantastic. Even in motion when you use the brakes to slow down and continue to...

Hi Buba, I'll hope you consider to set a "minimum brake activation time" that could be fixed at 1-1.5, enough for any shift sensors if there is no time for a configurable parameter! For stancecoke, in my opinion yes and no: in the sense, it is true we do not need the gear sensor having the...