hi there,
I am looking for battery system solution for my up coming e-scooter conversion, rough target in mind is 100V/100A battery. What's the recommend battery system with pack/bms/charger solution that's easiest to get and maintain? I am thinking of stacking two high-discharging 48V...
was wondering if anyone tried Neumotor's 44xx series? it's listed at $525 for 4410, sounds like a comparable compete against 3210/3220?
http://www.neumotors.com/Site/Motor_Price_List.html
the inductance of the motor is directly proportional to the number of turns. for instance, a 8-turn 3220 would have double the inductance of that of a 4-turn 3220.
is Bob talking about a low-turn 3220/3210?
i am in one of the few 1st group buy orders that haven't been shipped. mine is a 3220/7-turn/6-wire/double shaft. it's been 4 months since the group buy was formed so i started to worry, maybe i am too anxious :oops: actually i saw the other order that has the exact same configuration been...
hi Matt,
how much more for 3220 if i want the shaft to be 10mm and longer/stretching out from both ends instead of one end?
my config will be 3220/7turn/6 wires/10mm shaft/shaft stretching out both ends/black can
please let me know
thanks,
-george
i have a ebay "mystery pentium 100A" controller in hand so i also took a look of it's make. interestingly i found that how they rate the current capacity is very different to the Turnigy ones.
for this Turnigy 40A, it has two mosfets per phase, per switch. each mosfet is rated "absolute max 20A...
that Vcc is actually 12V bootstrapping supply that comes from this:
=======
ST662A Series
DC-DC Converter For Flash Memory Programming
Output voltage: 12V +/- 5%
Supply voltage range: 4.5V to 5.5V
Guaranteed output current up to 30mA
Very low quiescent current: 100mA
Logic-controlled...