Recent content by Karisma

Hi all, I bought a PHET battery from EV-power (WA) in mid 2008 and have only just started using it (but regularly kept it charged up whilst it was off the bike). I've looked through all the threads which mention PHET and can't really find anything directed towards this one (which is pictured...

GL1 motor to ecrazyman controller (found this combination on the 13th guess) (Controller - Motor) Hall sensors Blue - Yellow Green - Blue Yellow - Green Motor phases Blue - Green Green - Yellow Yellow - Blue

Thanks for the advice.. I've since bought a controller from keywin (ecrazyman) and I eventually found the right wiring arrangement yesterday - it runs very smoothly - not a HEAP of power but it's "pedal assisted", which is what I was after. I will post the wiring combination in the thread with...

Great, thanks for the replies. ebikes-ca have this: http://www.ebikes.ca/store/photos/C3625-NC.jpg, which seems close to what I'm after, except the pin out for the motor and battery are unfortunately missing. Although it is entitled a "Brushless" controller, so it should be ok. In terms of...

Ok. I'm happy to go for either design (sensored/sensorless), it will probably come down to other things like local availability (AU) and supportability. I found this one here...

Hi all, I have a GL1 hub motor from here (http://www.ebike.biz/) but I never was sent the controller (and can't seem to get any success in multiple reattempts over the last 18 months) so I'm not too sure what I should do now. Does anyone know what controllers will work with this exact motor...

Currently building my own controller for bicycle hub BLDC motor, and I think I shorted the signal line with the 5v line on the Hall's. So thanks everyone for giving their tips in this thread on replacing hall sensors, I'm far from the only one!! I had just put in an order for the SS40A's when...

I don't have an answer, just some things to think about. Every wheel demands torque for rotation at a given speed for a given load. For starters, with no load, there is the force of angular deceleration due to what we'll lump together in the category of "internal resistance" that needs to be...