• Howdy! we're looking for donations to finish custom knowledgebase software for this forum. Please see our Funding drive thread

Recent content by kosmpryw

  1. kosmpryw

    BBSHD voltage and capacity issue with eggrider presets

    I really don`t know where these changes made by the eggrider are saved to? I assume it made changes to the controller as when I`ve change the battery from 15Ah to 21Ah I`ve also changed the BMS but the 15Ah data still is visible in new BMS so if it`s not the BMS it have to be the controller.
  2. kosmpryw

    BBSHD voltage and capacity issue with eggrider presets

    In the BMS app I can set the capacity to 21Ah but after one charge cycle it goes back to 15Ah, and the 15Ah is the value I`ve set in the eggrider in past. I don`t know where that data is stored but I guess it`s not the bms as with the 21Ah battery I`ve got new BMS (with BT), and when I was using...
  3. kosmpryw

    BBSHD voltage and capacity issue with eggrider presets

    I`ve change capacity in the eggrider, rigt before it died and it affect numbers shown in BT app. My question was - is there any way (except with the eggrider) to change it back?
  4. kosmpryw

    BBSHD voltage and capacity issue with eggrider presets

    As I wrote - configuration tool provided with the open source firmware works and I`ve already changed the voltage. Main reason I wanted to use it is to change battery capacity as my BMS BT app recoginzes smaller than real capacity and can`t provide accurate %.
  5. kosmpryw

    BBSHD voltage and capacity issue with eggrider presets

    I`ve bought the eggider because of 2 factors - small, compact size and ability to do change parameters as with USB thru the BT. Altrough using it for almost 2 years I must say that buttons are not handy at all... Now I`ve changed it do DZ39 and I`m more than happy.
  6. kosmpryw

    BBSHD voltage and capacity issue with eggrider presets

    Yes, you`re right - BBSFWTool is working and I can set 58.8V max voltage but I`m unable to change battery capacity from 16 to 21Ah. Also strange fact is that BBSFWTool is showing my max Amps as 30A? I thougt that open firmware gives ability to use 33A? I have BT BMS and I saw that my engine...
  7. kosmpryw

    BBSHD voltage and capacity issue with eggrider presets

    Will try that but as far I`ve tried after updateing firmware to open source one none of configuration tools were able to connect to my controller. Altrough engine/controller is woring fine.
  8. kosmpryw

    BBSHD voltage and capacity issue with eggrider presets

    Hi there Once upon a time i had an eggrider v2 and 16Ah 48V battery, it was working fine until the lcd decided to no longer turn on so I`ve changed it to DCP-18. Now I`ve changed my battery to 52V and 21Ah but LCD and controller identifies my battery as I saved it in eggrider (when it was...
Back
Top