Recent content by LegacyCode

I've got most of the stuff sorted now, The BMS i've ordered has arived, cells arive tomorrow (ordered 74 Samsung 35E cells and 10 of the cheapest cells nkon sold to practice on) The aluminum case has been made and sent by the seller. Theres a bunch of little parts like wires and connectors i'm...

I've ordered an enclosure from a seller on aliexpress at a custom size, decided to go with 14s5p in the end with Samsung 35e cells. I'll order the cells once i've got all the other stuff in, still need to look for a BMS if anyone has any suggestions on what would be good I'm still tempted to...

This enclosure could work at 280~300mm length if they are willing to sell me one. I'm not sure how much extra height id need 69.6mm might be cutting it close if it works at all. If there's anything with a bit more height then this one, i'm pretty sure it would fit, can use the bottle holder...

Might go with these to hold it together and have them upright. https://www.aliexpress.com/item/4000050554402.html just want to make some cardboard cutout and put it on the frame to see how much space it eats up before committing to anything. Could possibly find enclosures for that just haven't...

These bafang motors have a controller built in, supposedly all it takes is remove the bottom bracker slide in the motor, hook up the other stuff and add a battery but so far it hasn't been that straightforward. Bought this bike and the motor thinking i'd be done after buying a battery pack that...

5 Levels of peddle assist, it should just cut off peddle assist above 25km/h, T think it was possible to add more, should still have one of those same programmers they use floating around in a bin somewhere, Think it might be tricky to make that fit, I'm waiting for a Chinese seller to get...

I think 84 Samsung 35e would be a good option (s14p6) for 20.7ah and 48a max if i'm correct? that should be enough the controller in the motor has a 25a max rating from what i found. Cells : Samsung 35e x84 Step Down : https://www.aliexpress.com/item/4000816351721.html (plastic one) Switch ...

I don't think there's any restrictions on battery's I'm not 100% sure though i couldn't find any info on it. Thats from the US and seems like quite a lot for 6ah, Shipping and import costs would add to the price quite a bit. I've got a DCP-18 display it allows you to set a speed limit, I'm not...

I'll keep them in mind! 112 cells cost 300 euro or so at nkon I'll read through these at some point, seems useful! Took a look at the hardware stores, they dind't seem to have any of this

Been trying to figure out how many cells i can fit into things using inventor this one from aliexpress can hold about 50~60 18650 cells at 180mm length or so with space for a bms https://www.aliexpress.com/item/32931329946.html also looked at a pvp pipe wtih a 100mm diameter and a 1.8mm thick...

Problem still remains, there's probably no option for me to fabricate some enclosure within a reasonable time and cost wise considering how many tools I'd have to buy and things to learn, i wouldn't be surprised if it took me up to a year. Some pre-made extruded aluminum enclosures that require...

It's too big, Ordering from the US would become very expensive shipping and tax wise too. Did that for the different hailong packs and some other options all too big! Would still use thin wires internal if that makes a difference, will have to read up on this! I'm honestly not 100% sure...

Spot welder just arrived

This is about the space i have roughly might still replace the spring with one that takes up a bit more space in the future wich would make it smaller Problem still remains, i don't have the skills/knowledge or tools to make something like that, I wanted to go with some premade extruded...

None of their packs can fit the triangle, the smallest one was too big, it's full suspension MTB i'll put a picture below. I'd like to go with some premade enclosures that can just be modified to go on the bike, i have neither the tools nor the knowlage or skils to make a full enclosure by...