Recent content by Linukas

it is 51 slot, 46 pole motor, similar to mxus 3000.

for some time I'm working for liquid cooled hubmotors (mxus analogue), and their performance looks good, so now I'm trying to make something different from that motor. Main thing is to make it for mid drive use, but with more power, thinking about it design something like big rc motors/emrax...

Hi there, nice to see discussion about our new project. It is hard to answer correctly some of questions, as we testing some different stuff and do not know exactly what would be in final product yet, but here are some details: - we do not use hub motor; - we also do not use any of standard...

little miss understanding: I meant hubmotor, just as I know there was 3 stator versions, 1v was with stamped steel stator, 2v and 3v with aluminum, here is how looked v2: and this is v3: to make liquid cooling quite easy for V2 is possible (but need to mill stator, so to offer kit without...

yes, for V2 is impossible to make copper because it will have corrosion with aluminum, I have couple ideas how to make it cooled also have idea to make different axle to fit standard DH bike through axle, but for now my whole time goes to new prototype of frame kits and bikes, and cann't spent...

No, cromotor is made in QSmotor factory

here is CAD drawing, it is simple with no accurate dimensioning, this axle fit to V1 motor, I do not know if it fits to V2 because do not have it. as for cooling, I made some cooling modifications for middle version of cromotor, or better to name it manufacturer name: QSmotor, it have very...

Nice that you got my package, but you little bad understood my explanation about axle, it is made of good quality steel, but it milling finish is not perfect.

shimano bb92 is much lighter than standard 68mm BB, thats why is that decision. but if required 68mm bb can be made, it needs just additional part that presses in frame bb tube. Schlumpf drivetrain (wider version) fits to frame without problem.

Welding is made of professional (not me, I'm just beginner in welding), he have a lot experience welding aluminum, stainless steel, magnesium, titan and other materials. his quality is good and that's why I employ him.

here is new theme for stainless steel frames order: http://endless-sphere.com/forums/viewtopic.php?f=31&t=64334

rear shock mount hole is 8mm and 23.5mm inner width.

thanks for good words :) I do not weld my frames, it is done be professional welder :) as for steel frames, why some of you want steel frames instead aluminum? I worked a lot until get required aluminum strength after heat treatment and artificially aging, and it is almost same strength like...

:) GkfpyUo83oY

axles are made with 2 side grooves, in one goes hall wires, in other goes pipes and hall/temp cable, axle diameter in that side is 30mm, so side cover is modified to fit bigger bearing ID-30, OD-42. axles are pressed to standard stamped steel stator. for now have just one picture of ussed...