So If you reduce the current by 15%, you will certainly lose acceleration, but not so much that it will be drastically felt, the range will increase and it will probably stop cutting the voltage in the middle phase of the discharge, but it can happen much later, so you can already be satisfied...
It is difficult to take any action without first measuring the battery current draw parameters by the controller while loading to cut off by the BMS.
If you focus only on replacing the BMS with a more powerful one, it may turn out that the battery will degrade faster.
If, on the other hand...
Hello everyone.
In my opinion, I would solve the problem as follows, you should measure the load at which this BMS disconnects the current and set the maximum current in the controller below this value to protect the battery. The second solution is to buy a second such battery to increase the...