Recent content by martin.shane

So all clear... controller fail. Strange as water should not affect it as it is covered by silicone. I will seal all motor tommorow. For future. Is a pitty that now I do not have temp sensor . I have reduce battery current up to 13 so should be ok

I have disconected all connectris inside and make it dry . What connector is responsible for cadence reading? Bigger one or the small one ?

Please help I have lost today cadence and speed indicator. I mean it works somtimes and then it is blocked for few sec and comming back. When I put assist mode to 0 all works fine. Cadence and speed shows normal values. Problem starts when assistence is more the 0. I also have check with the...

HI I have updated controled to version v20.1C.3 and on torque mode and MTB I still have self running motor. I can't find bootloader for 860C to version 1c3, so i have v 3 on controller and v 2 on 860C . It should be like that? I know that this bug was eliminated so, Im suprised that i have...

... OK. Java configurator... hmm. Another software besides SVTP? Is there any step by step manual to do it as it is for 860C? . I think I will give up with LCD5 programming:) :lol: :?: :?: Last question. For the new version of OSF -V20.1c3 I have downloaded .hex file for programing...

HI Im really amazed by new Mbrusa firmware. Just installed in a new bike. Is great! Question My father bike has 2020 Tsdz2 motor with 8 pins LCD5. Old controller. How to update ( if I can) to new firmware from Mbrusa? I mean for 860 C all is done and works great. I have a necessary cables and...

3D prints are only for prototyping in this case. Is all about the structure and precision. Of course U can use it but it will last only up to first hard push to the pedals. Chain line and size. Size. Its all depends what wheels are U using in U bike. As I have pointed in the diagram it plays...

I will have few of them after CNC process. Cheap. Only Cost of the material for members of this forum. I design it for my custom bike frame and it will be like an option for my customers if they choose TSDZ2. But it will work with other frames as well. For now the most important thing is...

Battery weight is 3.3 kg for 17,5 AH . Samsung E35 , 3.7 v , I use it for longer distances and for ... MTB. As We all know efficiency and power is going down if the V is dropping. Having bigger battery let me go with power for around 50 % of capacity. Then it drops and I can feel it. ( I have...

I have made today 35 km with OSF 1.0.1 I have used most of the time 8-12 level of assistance. a lit bit of enduro ride, flat with single track Distance: 35 km Outside temp : 19 C Motor temp start - 21C Motor temp - end- 41C peak- 54C FW- On Battery: 830 Wh battery start-100 %- 54.6 V Battery on...

Need a lit bit help as i get confused. Max motor speed parameter visible on the main screen ( not on the set up menu) . I have notice that is set to 1500 . What does it exactly mean as if i have 48 v battery and 16 amps set up then Max motor power is around 750. How change it from 1500 to lets...

Im running now 1.0.1 ver My TQ sensor is very limited range . I did precise calibration for left and right crank and it is great now. Only one thing what bothers me a lit bit I have Left crank down as a start calibration. And it TQ menu i have set up it as a LEFT. I start with Left crank down...

I confirm that for short range TQ sensor range version 1.0.1 is better. I could do calibration for left and right side of crank and now in TQ mode or Power mode I fly. Has some disadvantages like : delay more noise And limited assistance modes but it save me for now. I will have new motor next...

Thanks:) I try every set up. Unfortunately with my TQ sensor range most of the modes are not for use. Whatever I do i have self running bike in TQ and EMTB mode, also cadence assistance works only up to level 4 then is cut off. I really like this 20.1.C2 version. Is quiet and simple. But for...

Regarding my very limited TQ sensor range Im considering to adjust that sensor. I try to understand manual . I have one problem lefMy wife TSDZ2t side- what does it mean? Im confused:) For now , in technical info I have " ADC torque step cal =95" so I think I need mechanical adjustment of TQ...