Recent content by Merrix

The motor does have an internal speed sensor with 6 matching magnets on the side cover. The motor connection is the smaller circular 9 pin. The original electrical (controller, display, PAS and throttle) has all be swapped due to the bike being obsolete and no longer supported by the...

I have a bike with the G360 500W motor and am having a hard time getting the speedo to work properly. It works intermittently but will drop to 0 while coasting. Does anyone know what P1 and P2 settings should be? I know there's 6 magnets around the outer case/gear. I tried a combination of...

Finally got back to working on the bike after a couple weeks. Still having issues with the bike. It's really difficult to properly program the controller when I have no idea what model of controller the bike has. Does anyone have some recommended settings regarding the current values? Also the...

Tried 46 and the motor is still shuttering. Had a mishap with the axle spinning which took some time to repair. Got a nice solid torque arm on there.

Update: I was able to connect to the controller via Bluetooth and see and change settings. I can get the bike to go much faster but I have to slowly roll the throttle. If I throttle to fast, the motor will shutter and is unhappy. I believe the issue is the poles in the motor is not programmed...

I guess I can elaborate more on why the bike came to us. Customer was unloading his bike out of his truck with the display turned on and when he dropped it from the tailgate, the whole system shut off. I thought it was a lose connection but everything was good from what I could see. I tried a...

The current voltage from the battery is 82V (72V battery) and I replaced the display with the same (72V) as the one that came off. I tried a KT display (48V) and it turns on and operates the same as the 750C. I have tried maxing out the current output as well as lowest setting. Messed with the...

I work at an ebike shop and a customer brought in a custom built ebike (his sons bike who passed away) that had a bad display causing it not to turn on. After replacing the display, the bike turns on but will not exceed 10 MPH. Also the speedometer doesn't work nor does it show power output. I...