Looks really good!
I highly advise front wheel drive.
On these small kick-tail boards it really does make all the difference.
Otherwise look forward to a whole bunch of wheeleez (:
Have fun, keep postin
I use 4 cell 8000mah lipo batt with 5060 motor on my mini skate
it's a great combination. gets to about 20kmh speed and 15 km range easy.
IMO there is no need for 6s
It's a regular LiPo (2 zippy 3cell 5000mah in series)
how do i disable cutoff in BLDC? (didn't seem to find it. not worried about low voltage got a lot of sensors.)
Hey
I've attached a photo from the BLDC settings, so you can see if I did anything wrong.
As far as the battery, it's a 6 cell... no question about it. (:
http://imgur.com/GvmRkMX
Hey guys,
I've been riding with the VESC quite a lot not but there is a problem i can't seem to solve.
Every time my battery reaches under 3.9V per cell the board stops working.
I'm running 6S setup so when the voltage gets to 23.4 it just stops running.
if i disconnect the power and re-connect...
I usually ride it at about 15km\h (around 10mph)
top speed gets to 25 km/h (18 mph)
Feels like the perfect speed for a board this size.
and with the 8000mah it gets amazing range.
Honestly i wouldn't change a thing, great little board for transportation around town.
Used your tip for the configuration with the serial monitor. works great.
sadly still entering programming mode once in a while and screwing up my favourite settings..
Am i the only one who it's happening to?
Hey,
I was wondering on putting some bigger wheels on one of my boards.
do the Onda 5.5" wheels fit on a regular truck?
has anyone tried this? is it any good?
any other suggestion for a good cheap big wheel setup?
thanks
Hey,
Almost finished with my new build,
Wanted something more compact and travel friendly then my big longboard.
Here's the result:
Deck - Sector 9 29" mini longboard
Trucks - Gullwing mission
Wheels - Arbor 72mm i had laying around
Battery - 4S 8000mah Zippy 25C
Engine - 5060 270KV
ESC - HK...
Hey,
I've been using the new code with my Arduino Nano and Nyko Kama.
I've been loving the code but i have a few question, or comments?
1. Sometimes when i use C+Z i.e raw mode, and I'm at a stop light or something i accidentally get into calibration mode and recalibrate the acceleration, which...
Hey,
Thanks for the quick answer!
I'm sorry to hear about your accident, at least your healthy (:
parts i already have
- 2Xarduino nanos
- batteries and voltage control for 5V
- 2 X NRF24L01+
i don't have any current sensor
is this what you mean...
Hey man,
Great little build!
I especially loved the remote.
I would really appreciate it if you could share the details:
On the Board
what are the parts
what connects to what
whats the code uploaded
On the remote:
full parts
connections
code
This would really help me,
Thanks a lot!
Hey,
looks nice
but what do you need it for? why not just break with the engine?
I though about a freewheel gear so i could glide more and use less engine, then indeed a brake will be needed
but with a regular design whats the need?
Thanks