I should have said - the Short_Pin should be grounded to the output (DC) -ve
SHORT_PIN
The short pin is used to disable the rectifier if it is not
fully seated in the slot. It is must be tied to OUTPUT- in
the shelf backplane in order for the rectifier to
provide proper output voltage. The pin...
It's actually an easy one to interface without a PCB. Normal spade terminals are very secure on the AC in and DC out. Small jumper cables go to whatever Can Bus thingy you're using. There's a short pin that's got to be grounded too - just like a lot of server PSUs.
I don't have that PCB...
Do you want the good news - or the good news?..
It has sticky voltage :bolt:! I've tried it with a few voltages and it definitely remembers it.
This is a different PSU from the others so I guess the firmware is slightly different too.
Haven't tried it with any other settings as they're not...
Heads up for bargain power supplies!! 380875 ELTEK Flatpack 2 3000W 48V FRONT END
This has a different interface/pinout at the back but it's all there.
** £15 delivered! ** These are selling fast but they had 400 in stock the other day. I'm not the seller - just happened to come across it...