Hey all,
I run a small fleet of 15 eBikes and we have a handful of units wth the TSDZ2 motors that we've built up ourselves. All the motors have the VLCD5 display and we are using the OSF. Been running things like this for over a year and all has been good -- except for that one unit...
When the motor is powered on via the display AND the wheel starts moving using the pedals. It only makes the grinding sound when the rear wheel is spinning and the motor is powered on. Happens in the stand and while riding (no difference). If you stop pedaling, but wheel is still spinning...
Hey all
It's not the IGH making the grinding sound. As mentioned, if the motor is switched off, the bike runs silently as normal. As soon as I switch the motor on (can even be in neutral) I hear a loud grinding sound. More pronounced when any of the power levels are selected. Makes the...
Hey all,
Just had a customer bring in a Mercedes/Smart into the shop they inherited from a family member (like this: https://electricbikereview.com/smart/ebike/). It's an absolutely beautiful bike.
Because the bike has not been used for several years, we ran the motor/battery through the...
Continued my troubleshooting. Swapped in another new motor and found the same issue. Swapped in a new display and no joy... unplugged the brake sensors and that seems to have stopped the issue. One of the supplied levers must have a faulty sensor that's causing some issue.
Hey all,
I have 8 or so TSDZ2 motors and it looks like one of them is exhibiting some unusual behaviour. The motor starts up fine and when I initially start pedaling, the assistance kicks on as you would expect. As soon as I stop pedaling and then start again, the motor no longer provides any...
I've just recently purchased 12 x TSDZ2 motors with the VLCD5 display and have successfully flashed and set up my first 2 motors. Want to extend my thanks to all the developers who have worked on the code. I was very disappointed with the performance of the stock TSDZ2 - in short, the motor...