UPDATE: I've solved the throttle issue described below. I just realized that the throttle control uses the value for the specified "Designated Assist" level. In my case, this was set to 9, which is not a level that I've configured to give 30A.
As stated above, I'm now running...
I replaced the controller on my 2019-ish BBSHD. Display would turn on, but it was throwing error code 10 and I couldn't get a response from the motor using either input from the pedals or throttle. I re-flashed with "CRR10E4830E105027.1_(latest)_190927.bin". Solved my problem. Interestingly, the...
I replaced the controller on my 2019-ish BBSHD. Display would turn on, but it was throwing error code 10 and I couldn't get a response from the motor using either input from the pedals or throttle. I re-flashed with "CRR10E4830E105027.1_(latest)_190927.bin". Solved my problem. Interestingly, the...
Were you able to find a remedy for this? Just put a new controller on a BBSHD I got in 2019 and am getting error code 10 upon startup with no ability to operate the motor.
I’m also wondering if you have an update on a fix. I have a 2019 BBSHD running on 52v from Luna and recently replaced with a new controller. Immediately throws error code 10 and motor wont operate. Sounds like a very similar situation.