Recent content by Uran93

Great! Thank you for explanation! Please keep posting!!!

Amazing! Thank you for very detailed instructions!!!

Great efforts! My respect. Looking for bigger (longer handle battery also). Could you please explain how did you calculate these numbers? Multiple what on what? I'm a total zero in this subject and need to understand the basics. Cells i can use for the battery: Panasonic NCR PF 2900mah 10A...

Honestly, I haven't understood anything you wrote in this paragraph. Could you or anybody explain or put in some pictures please? You just scared me))

Nice topic. Could you please let me know what else do you need to install it, besides the fork itself? Anything? I’ve ordered the same from ebay and will get it next week. Hard enduro trails and jumps, my only use.

Don't forget - Zee has a different type of hose joints, compare to original Sur-ron brakes. It's called "banjo" connection. So, it is better/cheaper to buy "caliper + hose", cause original Sur-Ron joint won't work for Zee caliper. Just in case -...

Then all you need - just replace your sprocket for 58 or 60 teeth. Then you can drive uphill easly even on EP mode.

Why do you need new rototrs at all?

You can use Shimano BH90 hose kit. Easy to find on Amazon. But I personally replaced front brakes and will replace rear, cause both front and rear are leaking. Original brakes are very low quality copy from Shimano XT 9000 I guess. They have 4 piston calipers, but they (pistons) are leaking. If...

Hi, there! I think it should be 5 mm at least, to be able to jump through logs etc. Please let me/us know ASAP as it ready I will buy one immediately, cause my stock one is like a peace of paper.

Dear 3D TOPO, thank you for your response. I don’t think thickness is an issue. It would be great to make it much thicker and stronger than it’s now. There are some/enough room around the motor and for attachment points it can be aligned/bended accordingly even if it’s thicker. What do you think ?

Dear 3D TOPO, thank you for your response. I don’t think thickness is an issue. It would be great to make it much thicker and stronger than it’s now. There are some/enough room around the motor and for attachment points it can be aligned/bended accordingly even if it’s thicker. What do you think ?

Another issue - Sur-Ron is a great bike, but I have an issue with lower motor guard - it is made from very thin aluminum and bent already. It is too soft almost like a peace of paper or cardboard. Could you suggest who and where can manufacture stainless steel type of this part?

Hi guys. Any ideas of what kind of break liquid does Sur-Ron have? Is it DOT-4 or mineral oil? I have pretty weak front break efficiency, any ideas how to fix it? It is too soft and too weak.