Recent content by waynebergman

Yes I did actually get the X2. The X2 is 5 lbs heavier but I am not so worried about this fact. Contributing to the extra weight is probbly from the rims not being CF like the original Dengfu bike, also the bigger battery pack at 820wh and also the coil over rear shock and I am guessing the...

I have just purchased a new Luna X2 so I am selling my Size Med Dengfu M600 mid drive featured in this thread. Long story short - the bike is still in great shape, new battery and controller in the last year, tires good and overall the bike is in great shape. The main issue with this bike for me...

a few questions please regarding the innomaker option for making controller setting options. 1. can I use this solution on my Mac computor? 2. I guess from earlier in this thread there is reference to software and instructions for the innomaker solution but I can not find it, any links to the...

It sounds like one would be able to run the VESC controller software on a Mac ..... I just downloaded the app on to my Mac from this link https://github.com/rpasichnyk/vesc_tool/releases from the luna blog. I am pretty excited about this. If luna will sell me a replacement motor complete with...

I am not sure if the besst tool will work with motors that are not purchased from Luna. I may be way wrong on this but if you buy it from Luna it most likely will work with their LUNA motors but if you buy it from another supplier it may only be able to work with their motors. Not sure about...

Thanks for the info Andy. I was not aware of the UART version of the M500 / M600 and a canBus version. Not even sure what the difference would be. Even though my bike is working now its not smooth and kind of frustrating. The replacement controler and display from FLX let me get back on the...

Yes RoyRoy, as far as I know you need to make sure a replacement display is compatable with the controller you have and if you are needing a repplacement controller it needs to be compatable with the display you have. When the time comes make sure your supplier knows what will work with what...

I see the M500 / M600 thread https://endless-sphere.com/forums/viewtopic.php?f=28&t=100777 has covered the use of the BESST interface for firmware loads on these drives as well as other issues related to the M500/600 drives. The M500/M600 thread is now a couple of years old and I am wondering...

Yes XP, female connector at the throttle and male connector at the CAN cable on the bike, let us know how it goes.....wayne

Yes "xp67" I would think pluging into the existing yelo plug outlet will work for throttle if you have the correct main wire harness supplied . Look earlier in my thread on page two of this thread most of the way down the page,where it shows how I soldered the Luna half twist throttle to the...

Its not very impressive to see on there web site when you go to the page for this mid drive kit it only shows a drawing and states sold out. Hard to believe they would actually sell out before having a real photo of the assembly for sale. Big bucks also, seems like wishfull thinking at first look

Tom please update us when you have experimented with the programing tool. I dont have access to a PC any longer so not jumping in yet. XP you have mentioned the M600 does not operate on torque sensing but it does function on torque sensing. Just not as smooth as it should.

OK another update, I switched back to my original controller as I was thinking it was not the source of my problems but in fact it was no good. Error 30 displays with my old controler and new flx display. I kind of assumed that my display was the source of all my problems but this was because...

Hey xp that is a good plan, I will follow your lead and do the same. I dont mind having paid the 80 bucks for the spare contorller as I at least have a spare in my parts box and this also may help for trouble shooting down the road. If things quit working and if you know you have a working...

FLX, sells the main harness cable. You may not find the product on there web site but if you inquire through there site they may be able to help you. Marc (I think he is the resident mechanic) has been super helpful for me in regards to M600 stuff.....wayne