Great looking bike! What travel are the Zeb's?DaDo.Bzz said:E10 really good frame
Great looking bike! What travel are the Zeb's?DaDo.Bzz said:E10 really good frame
Dengfu E10v2 Frame, I know I need a 2mm offset Bushing and to shave around 4mm off my yoke, runs 8mm Bolts I think I read, but I don't run MX setup I am running 27.5 all around on medium frame. I want to order the Float X2 so I can get everything installed going have a bike shop install it, but I want to make sure i get the right parts. Was going to go with Cane Creek Hellbend 70 Headset, I am will be running 170mm Fox factory 38 Fork with 44 offset, I didn't know if I could buy a replacement yoke incase I take to much off or if the Yoke gets damaged when removing 4mm's off it to fit the 216x62.5 or 8.5"x25" rear shock, everyone running the 216x62.5 seems to be running a 29" wheel up front and I want to stick with 27.5 all around. I read @Thaber I think the name fit the 216x63 using the 2mm offset bushing in front and shaving the yoke. But I know he runs MX setup. I'm not doing to wild of stuff, but I need more travel and want to try to keep the travel 170/170. Was hoping to aquire a back up yoke for Dengfu E10v2 to see how much I can take off without reducing its strength to much. Last thing I want is for the the shock to crash into the seat tube, so the more clearance I can get the better. I have the money to pull the trigger on the 216x62.5 FOX Float X2 which is on super sale in that size and it should from my reading give me perfect 170x170 travel. I don't wouldn't mind going to 170mm front and 160mm rear but can't find any rear shock in a size that would give me that. I am having bike shop do the work, and they don't seem to be engineers, and I don't want to damage the frame. I took screenshots of all photos of shaved Yoke, and what offset bushings I need, but I don't know where to aquire offset bushings and if the Cane Creek hell bend 70 Headset is the right choice or if I should run a slackerized headset to keep geometry similar to what I had with 160 fork and 150 in rear. But I am no engineer and am a little lost On what I am doing, I've read every post on the Suspension forums. Only to see everyone is running MX or 29ers all around. Hoping the 216x62.5 would be ok on 27.5 front and rear?What's the "yoke" you're referring to? Knowing which specific part of the bike you want to modify, we may be able to suggest things
List of bicycle parts - Wikipedia
en.wikipedia.org
Your running 215x60? I thought you were running 216x63?Hi
I show you my E10 with some modifications done
View attachment 284773
I have reduced yoke width to install 215X60 rear schock, with fork in 160, i have 360mm BB height
View attachment 284775
to avoid a pebble gets stuck in swing arms
View attachment 284774
I have also increase length of remote and power supply wire, perform 2 holes on lower battery support to evacuate water infiltration, stalled the battery in its housing and add alloly plate to avoid to lose it. I do not see other potential problem who necessitate modifications ?