Search results

Date Relevance Most replies

  1. P

    Cineco City Slicker, driver programming

    Hello, I need to reprogram this controller because the handle pulls a lot with it as if it was set to a small voltage range but I don't know which pins and what program to do it, it's a controller from the Cineco City Slicker moped. Regards
  2. P

    I am looking for an original engine for a surron light bee X

    I am looking for an original engine for surron light bee X, maybe someone has an engine for sale or exchanged it for, for example, qs 165. Regards
  3. P

    Votol EM-200 Controller

    Thanks for the information. I try
  4. P

    Votol EM-200 Controller

    Currently I have a 1:4 ratio but it is too small, I will put 56, 65 teeth on the rear and it should be great and the maximum speed should be in the range of 130-140.
  5. P

    Votol EM-200 Controller

    Without just and I'm thinking about a larger rear sprocket to make a larger gear ratio.
  6. P

    Votol EM-200 Controller

    Hello, I have a problem with the slow start of the votol em200 controller with the qs 138 70h engine. The settings are shown in the picture. I was doing hall angle study and it was 55 degrees. The engine runs very well, but from 0 to 40 km / h it accelerates slowly, only then it pulls with full...
  7. P

    Rewinding the qs 138 70h engine and replacing the magnets

    250A The same as in the original qs 50h and he managed.
  8. P

    Rewinding the qs 138 70h engine and replacing the magnets

    Yes, of course, but my friend is already taking care of it, so I prefer to roll it on our Polish copper. Possibly magnets, but that's for sure after testing.
  9. P

    Rewinding the qs 138 70h engine and replacing the magnets

    I didn't buy this engine used, not new :-) also it could have been overheated once and it just burned up at my place.
  10. P

    Rewinding the qs 138 70h engine and replacing the magnets

    The magnets are fine, they attract very well. As for burning, there must have been some breakdown on the phases, maybe a factory error when winding copper, I don't know. Burning other engines, e.g. qs 205, k3 turbo, are very popular.
  11. P

    Rewinding the qs 138 70h engine and replacing the magnets

    It's about replacing the copper in the engine with better quality and a larger number of wires, then the power and efficiency increase, because Chinese copper is not pure, it only has different additives.
  12. P

    Rewinding the qs 138 70h engine and replacing the magnets

    Hello, has anyone of you ever scrolled the qs 138 70h engine? I installed it yesterday and unfortunately it was defective because it burned out after 20km :-( I have a friend who rewinds engines and I want to regenerate him, I'm just wondering what winding to use to make it stronger and more...
  13. P

    I am looking for used qs 138 70h in good price :-)

    I already bought the post to close
  14. P

    I am looking for used qs 138 70h in good price :-)

    Hello, I am looking for used qs 138 70h in good price :-) My motor in the super soco tc max is qs 138 50h and it's a bit too weak for 300A and if you find a cheap used 70h I would gladly replace it :-) The new one is expensive and I don't want to invest so much in the project because I already...
  15. P

    I am looking for a Fardriver ND72530

    Already bought, topic to close.
  16. P

    I am looking for an LCD meter for the FAR ND72530 controller with fast shipping to Poland

    Already bought, topic to close.
  17. P

    Nanjing far driver controllers

    I've already done 300km my super soco and everything is fine except one. When the handle is unscrewed to the max, the engine starts to vibrate strangely, as if it was getting lost at a large phase current. What can you do about it? it is rare to start like this to the max but I don't want to...
  18. P

    Super Soco Tc Max + 72v 132ah LG66Ah + Far ND72530 controller tuning problem

    I've already done 300km and everything is fine except one. When the handle is unscrewed to the max, the engine starts to vibrate strangely, as if it was getting lost at a large phase current. What can you do about it? it is rare to start like this to the max but I don't want to burn it :) A...
  19. P

    Super Soco Tc Max + 72v 132ah LG66Ah + Far ND72530 controller tuning problem

    Nice machine, the motor in the wheel at high power supposedly heats up but it is certainly very quiet, maintenance-free and consumes little energy
  20. P

    Super Soco Tc Max + 72v 132ah LG66Ah + Far ND72530 controller tuning problem

    I understand, so the power must be calculated from the voltage and current from the battery? Well, the battery is specific :-) Will you show a photo of the equipment or is it not ready yet?
  21. P

    Super Soco Tc Max + 72v 132ah LG66Ah + Far ND72530 controller tuning problem

    Yes, 15kW is already impressive with a weight of 120 kg, but this is the current from the battery, so the power at the phase current will certainly be higher around 300A, so around 20kW. The FAR controller will work better for sure, Sabvotons are very emergency and more suitable for bicycles...
  22. P

    Super Soco Tc Max + 72v 132ah LG66Ah + Far ND72530 controller tuning problem

    Hello, after changing the shifter mode to sport, it probably consumes max, I managed to download 215A at the start but I did not unscrew it to the max due to poor weather :-) I also measured the sag and it seems very small for these conditions and the battery was charged to 40 %. I want to set...
  23. P

    Super Soco Tc Max + 72v 132ah LG66Ah + Far ND72530 controller tuning problem

    everything is ok today I drove the first kilometers and I have a problem only with power consumption, the controller is set to max and the bms shows max consumption only 150A I'm uploading photos from the settings, my friend says it can be a rubber shifter and he would like to play with these...
  24. P

    Super Soco Tc Max + 72v 132ah LG66Ah + Far ND72530 controller tuning problem

    Today I will receive the Ct-22 meter and I have a question for you, in this diagram the connection is typically to the main plus. In previous motorcycles I had only 12v and I'm afraid to burn something :-) I understand that this meter gives the voltage and range after the main plus 72v, I have a...
  25. P

    Nanjing far driver controllers

    it worked normally on the old controller, on the new one it does not work but I think I will replace it with a digital one because I'm tired of it and a lot of wasted time :-) Dedicated digital will be much better because all functions will work
Top