Search results

  1. 500w_Of_Power

    It lasted!

    Hey everyone, in 2023 you guys help me modify my fist frame at 15. Just an update on it, nothing has broke, cracked, or burnt. Battery is running well and ebike is happy. Top speed in winter has been 32 on flat ground. I expect upwards of 34 in the summer without all my gear and warm weather...
  2. 500w_Of_Power

    Modded Dropouts Or Naw?

    Sure dude! I used 304-grade stainless steel, at 3/8 in thick. SendCutSend charged roughly $5 a part, and $12 shipping. I sent it to them using a DXF file.
  3. 500w_Of_Power

    Modded Dropouts Or Naw?

    I dropped the seat all the way, I'm 6'3 so I rarely sit down. Thanks!
  4. 500w_Of_Power

    Modded Dropouts Or Naw?

    Nay, staying original. Thank you for the information and advice. Without it, there would be no 1500w build. My battery is arriving Friday, to my horror they sent one with a defective BMS. Thank you again SO MUCH for all the info, words can't describe how grateful I am.
  5. 500w_Of_Power

    Modded Dropouts Or Naw?

    Oh yes, definitely. I took it for a ride and it was amazing, the power was unreal compared to my first 500w build.
  6. 500w_Of_Power

    Modded Dropouts Or Naw?

    Ok, I definitely won't. I tightened the crap out of my torque arm, it is NOT moving.
  7. 500w_Of_Power

    Death vibration at high speed acceleration

    It sounds like I am hitting a rumble strip. It is not silent.
  8. 500w_Of_Power

    Death vibration at high speed acceleration

    Hi all I built a 1500w e bike with a Voilamart kit, and I got a really bad vibration when accelerating past 20mph, and when it hit maximum speed (30-35mph) it stopped. If it was under no load (going down a hill) It would not vibrate. Could be a loose magnate, I tightened the axel nut some...
  9. 500w_Of_Power

    Modded Dropouts Or Naw?

    It is a nice tight fit, no wiggle room. I took it for its first ride (about 25 miles) And nothing came loose, cracked, or broke. I put accelerated hard, and it seems fine! The only thing was the motor vibrated when it hit about 25mph, and when it hit maximum speed (30-35mph) it stopped. Could be...
  10. 500w_Of_Power

    Modded Dropouts Or Naw?

    Pretty smoothly.
  11. 500w_Of_Power

    Modded Dropouts Or Naw?

    Could I bolt it directly to the frame and drill a hole there?
  12. 500w_Of_Power

    Modded Dropouts Or Naw?

    Ok, I have plenty of bolts! Should only take 5 min.
  13. 500w_Of_Power

    Modded Dropouts Or Naw?

    Flipped it around.
  14. 500w_Of_Power

    Modded Dropouts Or Naw?

    It is epoxied using JB Weld Steel as well so it should be fine. Here is a better photo:
  15. 500w_Of_Power

    Modded Dropouts Or Naw?

    Here are the modded dropouts complete! How does it look?
  16. 500w_Of_Power

    New Ebike battery bms completely dead or overcharge?

    I just returned the battery I don't wan my house to burn down if I screw up.
  17. 500w_Of_Power

    New Ebike battery bms completely dead or overcharge?

    Ok, I am back, I get 6.5v out of the discharge port, Bms plug is fine, What do I do next? How should I measure voltage?
  18. 500w_Of_Power

    New Ebike battery bms completely dead or overcharge?

    I will check, I am in school right now so it will be a while until I can look.
  19. 500w_Of_Power

    New Ebike battery bms completely dead or overcharge?

    Oh its the 13 groups of cells in the battery.
  20. 500w_Of_Power

    New Ebike battery bms completely dead or overcharge?

    I will check the BMS wires, too late to open the battery. As glennb mentioned, I will check the charger. I don't thing the voltage is too low, I plugged in a 36v battery and it turned on. The BMS is not getting a connection from one wire. Also, what is 13 groups?
  21. 500w_Of_Power

    New Ebike battery bms completely dead or overcharge?

    The battery has voltage, but it is being cut off from the negative wire.
  22. 500w_Of_Power

    New Ebike battery bms completely dead or overcharge?

    I fully charged my brand new never run ebike battery, and let it sit for a week, the charger says its fully charged, but no voltage is coming out of the battery- nothing turns on, checked with multimeter, nothing! Other batteries turn it on. It is a Cao MM 48v 20a battery.
  23. 500w_Of_Power

    Modded Dropouts Or Naw?

    I already got torque arms, but thanks anyways!
Back
Top