Search results

  1. P

    TSDZ2/860C firmware compatibility issue

    Hi, anyone got any thoughts on this? I've tried contacting the site I bought the screen from, but no joy. I can't find a TSDZ2 firmware 0.20.1c-3 so can't flash that, and don't have a Bafang display flashing setup, so can't change that either. I'm pretty stuck! Could do with any assistance...
  2. P

    TSDZ2/860C firmware compatibility issue

    EDIT: that picture was taken with a different firmware on the motor, it now the displays a firmware compatibility error so I'm sure I just need to get these firmware versions sync'd, just not sure how to update the display firmware.
  3. P

    TSDZ2/860C firmware compatibility issue

    Hi, I'm hoping someone can help. I have a TSDZ2 flashed with v20.1C.4-2-860C which applies fine using ST-Link. I have an 860C bought online which appears to be running 0.20.1c-3 (screenshot attached) No matter what I do, I can't seem to get the 860C to talk to the TSDZ2. I can't find the...
  4. P

    Mixing Different LiPo Batteries Good or Bad?

    Hi folks, I've had a read of this thread with interest. I have a related question. I run a TSDZ2 mid-drive off LiPo cells, running the custom firmware designed by casinho. It runs great on 12S (3x 4S 5000mah currently) but previously I have also run it at 14S (2x 5S 4000mah + 1x 4S 4000mah...
  5. P

    TSDZ2 loss of power - Casinho firmware 0.18

    That's a very insightful point. Guess I need to reseat all the cables and see where that leaves me. Thanks, I'll update the thread when I find the cause for the benefit of anyone else that has the same issue.
  6. P

    TSDZ2 loss of power - Casinho firmware 0.18

    Hi all Hoping that I can get some opinion from other users of the TSDZ2 with the Casinho firmware, I've been running this for over a year with no problems, but yesterday something odd happened. I was riding for some time and then stopped for a rest, after restarting I noticed that I was getting...
  7. P

    TSDZ2 and full suspension ebike

    I should also mention that I replaced the standard front cog for a 50T to make the gearing higher, which necessitated a longer chain. But now top speed is > 30mph which is a lot of fun!
  8. P

    TSDZ2 and full suspension ebike

    Hi all, I thought I'd post here and share my experiences, as a read of this post and a few others like it helped immensely in my build. I wanted to install the TSDZ2 in my Trek EX5 full suspension frame, having previously had some success on an old Giant NRS1, again full suspension...
Back
Top