Search results

Date Relevance Most replies

  1. U

    Difference between phase amp and battery amp

    Hi, I'm a bit puzzled and kindly ask for your help. I've a battery-pack that consists of 25s6p with 3,7V / 2250mAh per cell and a 5C rating. So per my understanding (yes, I know very limited) the total pack should be capable of 92,5V (hot of charger around 102V), 13,5Ah and 67,5A. So far so...
  2. U

    CroMotor2 not rotating easily after tightening the screw nut

    Hi, yesterday I was putting my new CroMotor2 for the first time in my Torque Raptor frame with a 165mm rocker arm. On the outlet of the cable, I´ve put three C-washers. On the other side (freewheel) just one big washer. After first starting to tighten the nuts, I notice that the CroMotor2...
  3. U

    CroMotor 2 & freewheel

    Hi guys, I just bought a 14T freewheel from Dicta which is unfortunately to small. Any advise on a freewheel that will fit)? Thanks in advance. Kind regards Lars (feels like a noob) :?:
  4. U

    Charging of Turnigy connected in series

    Hi guys, I want to build a battery with approx. 96V, 10ah and at least 5C. I thought about using some Turnigy or something similar from another brand. Let´s assume I use ten of these pack (http://hobbyking.com/hobbyking/store/__10288__Turnigy_5800mAh_6S_25C_Lipo_Pack.html) to build a battery...
  5. U

    Help needed - Good 24" rim and spokes for CroMotor V2

    Hi, I´ve just received a CroMotor 2 and I want to lace it into a 24" rim. Unfortunately I´m having a hard time to find a good combination. So I would appreciate any advise about what rim/spoke combination I should use. Hopefully somebody has build something before and real life test proofed...
Back
Top