Search results

Date Relevance Most replies

  1. 1000w

    RIP AussieJester

    AussieJester, Kim passed away this morning at 6.00am Perth time. Kim had been battling cancer for few months. He will be missed by many.
  2. 1000w

    Crystalyte 18 Fet sine wave controller 32kmh limit

    This is a new build I'm doing for a friend, Crystalyte 4080, 18 Fet sine wave, CA V3, and 58 volt 14S pack. This is a 55kmh set up. The kit is brand new and no matter what I do the controller cuts the speed to 32kmh. I have done throttle direct to controller and through CA, the CA has no limits...
  3. 1000w

    Stolen black EEB bike Perth Western Australia

    An EEB frame based bike I built was stolen from my friends house on Friday night (16.11.18). The suburb was Coolbinia. WA. It's a black frame, volcano forks, black 18 Fet Sine wave (Hadron) controller mounted on front of frame. Chrystalyte 4080 rear hub, 14s 14p cell man battery. Red high amp...
  4. 1000w

    Photobucket's new policy

    Anyone else get the start paying for 3rd party hosting email from Photobucket? From now on if you want to host photos on ES, for example, using Photobucket it will cost $39.99 (in Australia) per month. They tell me that my photos will still be available and safe but the 3rd party hosting option...
  5. 1000w

    Norco A line; Following in Timma's footsteps.

    So I was lucky enough to buy Timma's carbon fiber modded Norco A line. Timma (Paul) modded the frame to take a couple of 6S 4000mah Lipos and internally mounted a 12 Fet. See Paul's profile photo for that incarnation of this frame...
  6. 1000w

    Bafang BBSHD EM3ev, $549USD

    Does anybody have some miles on a 1000W Bafang mid drive? Paul, Cell Man has an excellent deal on them ATM and I was wondering what people think about these kits in general?
  7. 1000w

    "STOLEN" Ebike Perth Western Australia

    So last night at 2.10am 23 June 2015, my Giant NRS Ebike was stolen from the Perth fire station where I work. I believe this was a very targeted theft, a perimeter colourbond steel fence was cut and forced open then a cyclone wire fenced bike locker was cut open and only my ebike taken out of 3...
  8. 1000w

    EPX Terra shark carbon frame

    Purchased a Terra Shark frame today, I don't know what I'll do with it, I just had to have it. It's never been built, came with a carry bag, has a nice Fox shock and was $200. Not sure where to put batteries on it. Anyone had experience with these frames? Other forums seem to say they were ok in...
  9. 1000w

    LiFePo4 charger + $98 generator = not good.

    I went to a farm near York WA this weekend for a dirt track motor bike race. There was the full spectrum of ICE bikes there from Harleys to Honda postie bikes. I took my Giant Reign along to represent the EV world. http://www.endless-sphere.com/forums/viewtopic.php?f=28&t=34451&start=75 As there...
  10. 1000w

    Basman style cruiser with Mac and A123 20ah "FINISHED"

    This is my latest build which is still in the parts gathering phase as I haven't built the frame yet. As the title suggests I will be copying the style of a Basman cruiser for this frame, I was lucky enough to be able to trace a genuine Basman frame a few months back. This will be another 8T...
  11. 1000w

    Bargain wheel set with nexus 8 speed & hub motor

    Last week I noticed a wheel set from a Schwinn Tailwind on Chainreaction Cycles in their recycled section for $168. I couldn't pass this bargain up, so I bought it for an ebike build for the lovely wife, it arrived today and I'm really happy with them. I've scored a nexus 8 speed hub and a...
  12. 1000w

    72v to 12v DC/DC converter needed

    I want to power up a 12 Volt car stereo cd/tuner on my cargo bike with a 20S LiFePO4 pack (72volt). Anyone know how many amps an average car stereo draws? I have already blown up a Lyen 60volt converter on this pack, all it took was an absent mind and about 7 seconds connected to the pack with...
  13. 1000w

    incinerated fet in a 24 fet infineon

    Yesterday I went for a trouble free 9km test ride on this, http://www.endless-sphere.com/forums/viewtopic.php?f=28&t=34451&start=60 the controller was not even warm after 9km. Then in the afternoon, motor and controller cool, I went up and down the street twice stopped the bike then went to take...
  14. 1000w

    Long wheel base front box cargo bike

    I'm keen to be able to carry two kids plus gear up in front of me with an ebike and I want to build the frame myself. I have also been keen to try out my new tube notcher and my tig on steel. So after looking around the net for frame ideas, I spotted CETMA Cargo bikes...
  15. 1000w

    Possible Infineon issue

    The Rat Fink, http://www.endless-sphere.com/forums/viewtopic.php?f=6&t=28776 I built for a mate has done 2500km trouble free until now. It has a Mac with a 12 Fet Infineon and a magura throttle. It has an intermittent problem that comes and goes randomly. When you apply the throttle the motor...
  16. 1000w

    Belt driven off road bike (Giant Reign)

    My latest build is based on a Giant Reign frame that I picked up for $200. I want a powerful off road, rock climbing bike with a top speed around 40 to 50kmh. The drive train is a single stage right hand belt drive using a Cyclone 1500w motor, 5mm HTD belt, 20 tooth drive pulley to a custom...
  17. 1000w

    Urgent help required for EVAssemble pack

    Back in November last year I built a trike for a friends disabled son. I used a front hub kit from Cellman and a 36v 10ah EV Assemble pack (12 headway cells). Everything has worked really well until the last week he rings me up and tells me nothing happens when they plug the charger in and the...
  18. 1000w

    Cyclone 1500w motor with 24 fet infineon

    I am planing on running a cyclone 1500w motor with a 24 fet infineon controller on my new, maybe 7kw, off roader build. Build log starting very soon. While seaching to see if this has been done I found a pin out diagram for the cyclone hall wires which shows the hall supply to be 15 volts. The...
  19. 1000w

    Electra Rat Fink with Mac hub

    My latest build is for a friend who has given up smoking two stroke oil after riding my Giant NRS electric bike and seeing the light. http://www.endless-sphere.com/forums/viewtopic.php?f=6&t=17330 This one is going to be based on an older steel cruiser frame by Electra, they now use aluminium...
  20. 1000w

    8mm pitch pulleys from an exercise bike

    Today I picked up some handy belt drive parts from an exercise bike that was amongst verge side rubbish. I am hoping to use this on my next build using a RC motor. Unfortunately the bike was in bad condition and I couldn't find a brand or a model anywhere on it and I didn't have the camera with...
  21. 1000w

    Trial gears for Mac hub

    Much to my pleasure, Cell man has sent me two diferent sets of trial gears to test in my Mac. These gears were oringinally sent to Paul for testing and he has now asked me to do it. We don't know what sort of plastic they are made from and we have no expectations of them. Scientifically, I...
  22. 1000w

    Headway BMS fire

    I am reasembling my Headway 48V 20Ah pack ATM and when I got about half way through the assembly, flame and smoke started to come out of one of the BMS channels. One of the loose BMS signal wires must have touched where it shouldn't have, I guess. Once I had moved all the loose wires and blown...
  23. 1000w

    Giant NRS/Mac hub/48v Headway now A123 build

    This is my lastest new build and will be a little along the lines of Mark_A_W's fine set up. I am looking for a little more stealth than my cruiser build. I will use 16 x10Ah Headway cells (53volts) I split my 20Ah pack from the cruiser in half, a Lyen infinion controller, and a 500w Mac. I...
  24. 1000w

    Which hub motor in a 20" wheel

    I'm looking at building a mountain bike using long travel downhill forks with 20" wheels front and rear, the hub motor will be in the rear wheel. I will be running a 48v 20Ah Headway and would like to get at least 30mph, and have reasonable hill climbing power and disc brake capability. I have...
  25. 1000w

    Cyclone 1000w Cruiser

    Ok this is my second bike build using my Cyclone brushless 1000w. The first was powered with 4 x 20Ah SLA's. Seen here; For this build I'm using the frame from the two stroke powered bike below; Here are some early mockup photos, showing the location of the motor, 48V 20Ah Headway battery...
Back
Top