Search results

Date Relevance Most replies

  1. E

    New charger...

    Hallo boys, i want share the new charging station, i try to create very powerful and good looking charger, and i think....why not like a picture hanging? :) This charger is capable of 0-140 Volts and 0-20 Ampere, 2800W I charge alot of time and alot of pack continous, and the temperature of...
  2. E

    PAS and kelly controller

    Hallo boys, i need a help, i need to use PAS sensor on my Kelly controller, but i know (from kelly) i cant use PAS sensor on this controller... I need to put PAS because in Italy law require this for become legal, i want to know wich is the technical explanation because pas don't work on...
  3. E

    Greetings from Italy!!

    Hallo boys this is a little video with some italians friends, when we go with our bikes! Greetings from Roma :) http://www.youtube.com/watch?v=5bOIBWPKYLk&feature=youtu.be
  4. E

    Wires...

    Hallo Boys i have a question, many time i think, how much is important wire gauges for power setup... For example i always think, if i use 12gauge wire for 300A, yes this wires become hot, and maybe melt after 200C (silicon), but works, and 300A goes ok inside wires... But now i have a doubt, i...
  5. E

    Golden HPM5000B

    Hallo boys new project start, yesterday we create new frame for a Golden HPM5000b motor,with a kelly kbl 150A phase controller, and A123 120V cells... The ratio gear is 12pinion 46ring on a 16" scooter wheel Ok the bike seems go very good,but i imagine alot more power on this motor, the bike...
  6. E

    Monster motor

    Hallo boys this is the last creation from my team, we use a 400A 136V controller, a123 20A 136V battery, and Hubscooter motor, 20kg of motor!!! We need to create new swingarm for motor, 24 hours of hard works of CNC welding ecc... The support for the motor become very good, on the road the bike...
  7. E

    The best controller

    Hallo boys, i have a question, my top controller for now is a Kelly KHB 136V 400A, but as i alredy said, i dislike poor throttle response and bad regen on this controller (KBL is more better), i want to know wich is the "Best controller" in the same range price? I can't spend 2000$ in controller...
  8. E

    New creation with Cromotor

    Hallo boys this is the new bike create with my friends....enjoy :) http://www.youtube.com/user/Superbaics
  9. E

    Greyborg Test

    Hallo boys, 2 video from Italy with this fantastic motor! http://www.youtube.com/watch?v=zERaDVYqRRU http://www.youtube.com/watch?v=r5LNcO-jyY4
  10. E

    Urethane protection on Grayborg motor

    Hallo boys i want to share the Urethane isolation treatment on my Greyborg motor, i use this treatment on my previous motor like 5304, and in 2 year of daily commute in the rain, sun, ecc... No problem, the water come inside of the motor, but can't create oxydation :)
  11. E

    Phase current VS Battery current...

    Good evening guys, I have a doubt that I could never quite understand the difference between the phase current and the battery. For example, I usually set up when the battery 100A, on my lyen , Set the current phase to 260A (2.6 X). Now I have a 200A Kelly (phase), but why if i have max output...
  12. E

    Problem With Kelly KHB12201

    Hallo boys, i have a very strange problem with my new kelly controller KHB12201, i put this controller on my Greyborg motor, i found correct phase\hall connection, because with one another Kelly works perfect... But with this new controller the motor spin no smooth, and the kelly put out only...
  13. E

    Parallel Series

    Hallo boys i have a question, i have 114 cells A123 26650 2300mah, i need to create a 125.4V pack, 6.9A... The question is: Is better create 38 series of 3 cells in parallel, like 3cell connected together to create a single cell 6.9a, and after connect this big cell in series for 38S... Or...
  14. E

    5405 open...

    Today I opened my Crystalyte 5405, and I noticed a strange thing, they seem to have mounted a temperature sensor ... JUC-31F, which seems to turn off the electricity to the hall sensors to 85C protecting the engine.
  15. E

    Replace bearing 5305

    Hallo boys,I would like to change the bearings of my Crystalyte 5305, you know tell me the exact dimensions in mm? Thanks
  16. E

    Help with this charger

    Hallo boys i need a help with this charger set at 82V 10 amp, i need to set this charger at 98,4 volts, i try to turn the blue pot on the left side but the voltage rise up only at 88V, can you help me to set this charger at 98,4v Thanks very much Ettore
  17. E

    Battery amp or phase amp?

    Hello everyone, I wanted to ask you something, when it comes to Amps what do you mean, battery amps, or phase amp? For example, i set my lyen controller at 60 battery amp and 150 phase amp, and for me the "Amp setting" is 60 and not 150... Is correct, or you when you speak of maximum current...
  18. E

    Max power output for 9C 6X10?

    Hallo boys, i have a question, i try my 9C 6X10 at 80V 80A with my Lyen 12 fet controller (very good controller), but the motor get hot in few start\stop,the temperature is 60C, and the power is not comparable to my 5304, the 5304 is mooooore powerful than 9C, much torque, much speed, much...
  19. E

    Amp VS Volts

    Hallo boys, i have a question, if i want a 6Kw output of my crystalyte 5304, is better create this power with more volts or more amp? Example: 60Volt X 100Amp= 6KW or 111 volts x 54 amp= 6KW I know the volts increase the speed, but i don't know if the amp increase the torque... In the end 6 kw...
  20. E

    Remove the shunt!

    Hello everyone, I have a question, until now I have changed my welding controller shunt to increase current.Now I removed completely replacing the shunt with a copper bar. Obviously the power has increased greatly, the controller has risen to 45C What happens by removing the shunt? Just keep in...
Back
Top