Search results

Date Relevance Most replies

  1. E

    6374 Options with Skirt Bearing for Friction Drive?

    I'm finally starting a friction drive build. I'm going to try a Flipsky mini VESC, & while on their site I noticed that their motors look better than the Hobby King options. They have Hall sensors built in, & it looks like some have a thermistor also, although they do not mention it, so maybe...
  2. E

    Current Mod for Meanwell HRP-450-24

    I have several of these power supplies in my junk pile, so I would like to do the "R33" type mod to drop the current, as described here: http://www.recumbents.com/WISIL/e-bent/meanwell/default.htm I've spent a while looking at similar conversions, but have not found info for this particular...
  3. E

    Max safe input voltage for Turnigy chargers

    I have a couple of Turnigy chargers (Accucell 6 & Reaktor). The manuals state the max input voltage is 18V. I have spare Dell laptop power supplies which indicate 19.5V, so they may be slightly higher, at least open circuit. Has anyone used higher voltage with these chargers, or do you have...
  4. E

    Water-Cooled, 63mm, 8kW

    I stumbled across this while searching for a centrifugal fan for my Turnigy 6364-280. http://littlescreamers.com/id57.html The kV is high (650), but it looks like a low-volume outfit that might do a custom wind or maybe let you wind it yourself. $105 shipped from USA sounds pretty good. I'd...
  5. E

    advice on motor rewire

    I have a Turnigy 6364-280 that I'm in the process of switching from delta to wye. I finally got it apart using screw extractors - all the flatheads were superglued (not threadlocked) in place. The strands are not in nice pairs like in Jeremy's pictures. It's like an M.C. Escher painting in...
  6. E

    Thank You Endless Sphere

    This week I started commuting to work on an electric vehicle I made (just a board - maybe something bigger later). This site was the best source of information.  Some forums seem to have more bickering & opinions than useful discussion. This site has people who actually do things & post...
  7. E

    Flux Density Map for Turnigy 6364-280

    Hopefully this will help someone spec & locate hall effect sensors. I decided to do this after seeing where bigmoose did something similar for the 80mm motor. I'm not sure I understand what the +10º & +20º plots he made are for. If someone wants something like that please let me know & I...
Back
Top