Search results

Date Relevance Most replies

  1. pucksterpete

    9 Turnigy 5.0 Lipos for sale (Europe)

    Hi, I have 9 Turnigy 5000mAh 4S1P 14.8v 20C - 30C Hardcase Packs for sale I can let them go for 20€ each OBO I'm in France, so I can send within Europe, no states sorry.
  2. pucksterpete

    Quick ?

    On the BC168 charger, i have accidentally muted the sounds, for the life of me I can't seem to get the sound back. Does anyone know the correct sequence of buttons to press to get this thing un-muted? Tnx Pete
  3. pucksterpete

    Quick ?

    I have 2 Turnigy 5000maH 3s lipos, I have paralleled them together I want to balance charge them using the bc168 & balace board i have. my question is: can I leave the 2 batteries hooked up paralleled and just plug each balance cable into separate channels on the balance board? no sparks or...
  4. pucksterpete

    stupid question

    i'm loosing my brain. 84V 5s 4p, keeping all connections together I want to balance the cells, (probably not a good idea). so, here is what I do. using the bc168, I hookup one balance cable to one of the 20 packs I have making this 84V pack. It balances the other 3 packs its in parallel...
  5. pucksterpete

    E-cigarette in man's pocket explodes

    http://www.liveleak.com/view?i=ff6_1456337562
  6. pucksterpete

    Cycle Analyst Question

    Can someone tell me what the main difference between CA v2.3 & v2.25 firmware's? Tnx Pete
  7. pucksterpete

    possible dumb question

    Now I am running 84V 20Ah 20S 4P, the packs are 4S 5000mAh hardcase packs Controller setup for 70A battery question: how many amps are being pulled from each of the batteries in 4P section? tnx Pete
  8. pucksterpete

    Video taken few days after Holloween

    Sc2ldfi1Bk8
  9. pucksterpete

    Look whos on LiveLeak

    http://www.liveleak.com/view?i=0ef_1447707637
  10. pucksterpete

    Firefly

    Thought this was a pretty neat idea for people in wheelhairs http://riomobility.com/en/powerhandcycle/firefly-benefits.html W4jESFIbAS0
  11. pucksterpete

    104 tooth chaingring

    This guy actually reaches highway speeds on a custom made bike. Tom Donhou, a professional bicycle builder by trade, dreams of pushing the boundaries of speed with a custom made bike. Spending over four months designing a prototype, this video follows the journey of one man and his bike reaching...
  12. pucksterpete

    Le Tour de France Final Stage

    Just found out the Tour de France final stage is starting from my home town. I was thinking of wearing Lycra (Hyena's favorite) and riding the Cro with the pack. Whats the chances of getting disciplined by the local poopoo? Hey Pchen, you up for a ride?
  13. pucksterpete

    How HOT is too HOT for a Cromotor?

    Cromotor riders or anyone, what would be the MAX TEMP for the Cromotor to reach before melt down?
  14. pucksterpete

    Rust-Oleum NeverWet

    Rust-Oleum NeverWet DZrjXSsfxMQ http://www.rustoleum.com/product-catalog/consumer-brands/neverwet/neverwet-kit/
  15. pucksterpete

    3 Speed Switch Problem

    I am having trouble with getting the 3 speed switch to actually run 3 different speeds. I have the controller Lyen 24fet 4110 configured with spd1 34%, spd2 66% and spd3 99% Now, when I go to run a no load test speed 1 & 2 are the same, but 3 is faster, then when I switch back to speed 2 or 1...
  16. pucksterpete

    Lyen 24fet4110 shunt value question

    I have a Lyen 24fet4110, the shunt value is 0.667mohm. I am in the pre-test faze of hooking this up to the cromotor. The CA shunt value is set to 1.799, From looking at the manual for the CA 2.23, the allowed values for entering the shunt are: 0.763 to 9.999mOhm in low range and 0.0763 to...
  17. pucksterpete

    Lyen 24fet4110 Software Problem

    Having some trouble loading the different profiles in the software. I have the usb driver installed, I registered the 4 files, all is good there. I run the software that comes up fine and I can open the profile sample. But, when I go to open either the 3 other profiles, Initial Test, Default...
  18. pucksterpete

    Hall Sensor Connections 24fet4110 Infineon / Cromotor

    Does anyone have the correct hall sensor connections for the Cromotor to a 24fet4110 Infineon controller? Here is a video of the wheel spinning the right direction, but bad noise. :( AdUIvT2ui-s
  19. pucksterpete

    Bulk Charging Lipo's

    Besides BMS Chargers, who sells decent quality chargers for bulk charging Lipo's? Tnx Pete
  20. pucksterpete

    this is cool

    http://www.wimp.com/oleophobiccoating/
  21. pucksterpete

    Charger Question

    Can you charge a 123 52V 11.5Ah LiFePO4 pack (10amp charge limit) with a 99.84V 8amp charger? If the battery stops pulling from the charger I don't see why it should make a difference of the set voltage on the charger. Of coarse you wouldn't want a set voltage on a charger to be less than your...
  22. pucksterpete

    Excelsior/Strong GTS Cromotor Build

    I am about to venture into lithium polymers for my second bike. I have never dealt with this type of battery before. From following posts on here I know it can be very dangerous and you must watch the voltage when charging and other factors. The reason for the switch from LiFePO4 to Lithium...
  23. pucksterpete

    PM Not working

    Has anyone else not been able to send private messages to members? I keep getting this error when I go to send the PM. "The requested users to be added do not exist" The members user name are correct, so I don't whats the problem. Thanks, Pete
  24. pucksterpete

    Converted 66cc to Electric, 1st Electric build

    Hello, This is my 1st electric bike conversion. I have had 3 previous gas bikes since 2008. 1st was a Sun Bicycle EZ-3 USX HD Delta Trike w/Honda 4-stroke friction drive kit, and the last 2 have been 66cc 2-strokes w/jackshaft kit to run through the gears. They have been a lot fun, but its...
Back
Top