Search results

Date Relevance Most replies

  1. S

    Programming the Bafang Middrive BBS01+BBS02

    These are some of the notes I have kept that describe many of the settings: http://goo.gl/puHH4L --> pjgold's setting descriptions (slow start, start deg, wrk mode) http://goo.gl/HF6CWa --> 'Work Mode' setting explanation http://goo.gl/J6UOOc --> 'Current Decay' setting explanation...
  2. S

    New Bafang Crank-Drives

    This should work for you (credits to Kepler): http://goo.gl/XY43CN Regards, Shanman3us
  3. S

    New Bafang Crank-Drives

    That's exactly what happened to me. I had to carefully dremel it out. By looking I didn't see it since it was so uniform but after careful inspection I could feel the raised ridge from the seat tube going into the junction just a little too deep. Shanman3us
  4. S

    New Bafang Crank-Drives

    I trust this kit 100%. I usually use PAS and only the odd time do I use throttle but when I do use throttle, I am usually peddling along with it to keep the load down. I don't know if I need to do that but that is my riding style and I'm most comfortable with PAS. Shanman3us
  5. S

    New Bafang Crank-Drives

    No problem Tom. I'm new to this field as well. I know how confusing it is and, as was mentioned, there are many ways to read a statement since feeling can't always be conveyed especially based on nationality etc. I personally purchased from em3ev (Paul) solely based on all the information...
  6. S

    New Bafang Crank-Drives

    Savvas.... I appreciate the time and effort you expended to give such a comprehensive reply to tomjasz. I trust he'll be happy with your answer :D Shanman3us
  7. S

    New Bafang Crank-Drives

    Wow, you read way more into that reply then was ever intended. All I was doing was giving you a definitive answer in that it isn't the drive that is being talked about on this thread. I'm all for experimentation if I have nothing but time and money but I bought this drive because there was a...
  8. S

    New Bafang Crank-Drives

    Savvas Confusing to me, nothing new, but which is it? MXUS or Bafang? Anyone know or compare the two? It is NOT the drive that this thread is talking about and very likely not any iteration of a Bafang. Just because the web site put that in the address bar it doesn't mean anything. Most...
  9. S

    Programming the Bafang Middrive BBS01+BBS02

    OK. I see where your coming from. I always tinker with my computers and have multi-boot etc. For me, VirtualBox works great since it is just a program that allows me to install a virtual computer. Regardless of it being XP, Windows 7, Mac OSX etc. Maybe it's different for a Mac as the host...
  10. S

    Programming the Bafang Middrive BBS01+BBS02

    I don't understand. VirtualBox by Oracle is available for the Mac. No dual booting or anything. It just runs in a window on your Mac and you choose to load it whenever you want. You can still be running all your Mac stuff at the same time! I'm assuming you already have a disc to install...
  11. S

    Programming the Bafang Middrive BBS01+BBS02

    That's what I do. I run Linux (in this case Arch) and then I use VirtualBox with XP running in there. It works perfectly. The USB adapter I got could only run in XP with the drivers that were available for it. Shanman3us
  12. S

    Bafang BBSxx - fault finding and fixes

    Are you sure you don't have a C963 display? There is an error code 30 for that display as follows: 30 - Communication abnormality in system It's also possible that they have added that error to newer C961 displays :shock: Shanman3us
  13. S

    Programming the Bafang Middrive BBS01+BBS02

    @Kepler, Ken Taylor I appreciate both of your input on LVC. I guess my main concern is that I never accidentally take the batteries too low to do any damage to their ability to retain capacity when they get recharged OR worse yet never revive to anything usable if dropped too low. So, in line...
  14. S

    Programming the Bafang Middrive BBS01+BBS02

    Ohhh... :shock: This is absolutely new news to me. I didn't know that. Looks like I need to do some more reading on BMS's. Thanks Ken... Shanman3us
  15. S

    Programming the Bafang Middrive BBS01+BBS02

    Bump.......
  16. S

    Bafang BBSxx - fault finding and fixes

    It says, "This video is private"...
  17. S

    Programming the Bafang Middrive BBS01+BBS02

    Just checking.... I have the 500W 48V Bafang BBS02 and was just really looking at my 'low voltage cutoff' as set in the programming of the controller. The pack is a 13S 4P made up of Samsung INR18650-29E 2900mAh batteries. Currently the low voltage cutoff is set to 41 vdc. I always like to...
  18. S

    New Bafang Crank-Drives

    Excellent. Thanks very much Kepler :-) Shanman3us
  19. S

    New Bafang Crank-Drives

    OK. Well that sure seems to be good use of the power. It also appears to be quite a clime and then to only use 4 AH. I'll be interested to know what the settings are if you ever decide to make/purchase the programming cable to at least see the programming that is there. Being able to make...
  20. S

    New Bafang Crank-Drives

    OK, that's great info. However, just to clarify, you have a BBS01 but what motor wattage? What voltage for your batteries (36v or 48v)? What is your 'level 3' setting programmed as? I'm trying to get a handle on what range I have available on my BBS02 500w 48v system. My 'level 3' setting...
  21. S

    New Bafang Crank-Drives

    I don't know how to say this but you've got a HUGE bug in your install !! :shock:
  22. S

    New Bafang Crank-Drives

    Does anyone have a link for the proper tool to tighten the second (outside) lock ring on the bottom bracket? I had the tool for the first (inner) lock ring that basically pressure holds the motor in place but the outside one is not compatible and I don't want to scratch it all up. Shanman3us
  23. S

    New Bafang Crank-Drives

    I must agree as well. Nice clean look with the White on White.... I have the GT Aggressor (mainly red with some black) and have always loved the look of the frame along with the strength of the welding and angles etc. I also have to say, after programming my BBS02 500W 48V I'm totally loving...
  24. S

    Programming the Bafang Middrive BBS01+BBS02

    Now that is a beautiful plug you made. Nice work!!!!! I hear you about the Sugru packet and that's why I would choose to make my Sugru myself. It seems pretty easy and then you can make a batch virtually the quantity of what you want and it's so cheap you don't have to worry if you make a...
  25. S

    Programming the Bafang Middrive BBS01+BBS02

    Your absolutely correct. I could have removed the rectangular plastic shells surrounding the 3 pertinent wires on the USB to TTL adapter BUT that would have permanently altered the adapter which, with my OCD and all, goes against my grain. However it is the more direct approach and then you...
Back
Top